# femcyc

!! I have to initialize the variables somewhere, maybe in preCUST?
if Luth_Max = 0: LutH_Max = rand(312,360) & !! 13-15 days including ovulation
if Foch_Max = 0: FocH_Max = rand(312,360) & !! 13-15 days including menstruation
		
if $ARGS[0] = '':
	!{Hourly reduction in semen potency}
	!{First it sets the array index to the first index, then it checks to be sure the array tracking the age is less than 144 hours. If it is 144 hours old, it kills that index, which should shift the index up. If it is less than 144 hours old, it sets a current potency drop. The drop is 2x or 3x regularly, but during ovulation it is only 1x, to represent the better environment from fertile cervical mucus.}
	!{144 hours was selected due to that being approximately the maximum amount of time sperm is viable in the womb (120 would be more accurate, but there is leeway). PLEASE DO NOT CHANGE IT.}
	!{The potency drop may seem small in game-time, but is meant to be a reasonable approximation to real life. Avoid unprotected sex within 5 days of ovulation if you want to mitigate your risk.}
	!{the 'rcntorgzm' variable is set to determine whether Sveta has orgasmed within the last hour. If she has, a small potency boost for the guys she has slept with in that hour.}

	if rcntorgzm = 1:
		if rcntorgzmtmp = 1: rcntorgzm = 0 & rcntorgzmtmp = 0
		if rcntorgzmtmp = 0: rcntorgzmtmp = 1

	end

	cumarr_idx = 0

	:cumarrloop
	if cumarr_idx < arrsize('$cumarrnam'):
		if cumarrcpt[cumarr_idx] > 0 and cumarrage[cumarr_idx] < 144:
			if rcntorgzm = 1 and cumarrcpt[cumarr_idx] < cumarrppt[cumarr_idx] and cumarrage[cumarr_idx] < 1: cumarrcpt[cumarr_idx] += cumarrppt[cumarr_idx] / 12
			cumpdrop = cumarrcpt[cumarr_idx] / (144 - cumarrage[cumarr_idx])
			if cycle ! 2: cumpdrop += cumpdrop * rand(0, 2)
			cumarrcpt[cumarr_idx] -= cumpdrop
			if cumarrcpt[cumarr_idx] <= 0:
				gs 'cum_cleanup', 'cleanwomb', cumarr_idx
			else
				cumarrage[cumarr_idx] += 1
				cumarr_idx += 1
			end
		else
			gs 'cum_cleanup', 'cleanwomb', cumarr_idx
		end

		jump 'cumarrloop'

	end

	!!Succubus absorption of sperm in womb
	if succubusflag = 1:
		if arrsize('cumarrppt') > 0:
			succycletmp = 0
			:sucvagabs
			if cumarrdel[succycletmp] = 0:
				if cumarrcpt[succycletmp] > 10000:
					sexnutrition += 30 * succublvl
					succubxp += 3
				elseif cumarrcpt[succycletmp] < 3000 and cumarrcpt[succycletmp] > 1000:
					sexnutrition += 5 * succublvl
					succubxp += 2
				elseif cumarrcpt[succycletmp] =< 1000:
					 sexnutrition += succublvl
				else
					sexnutrition += 25 * succublvl
					succubxp += 3
				end
				gs 'cum_cleanup', 'cleanwomb', succycletmp
				sucabscum = 1
			else
				succycletmp += 1
			end
			if succycletmp < arrsize('cumarrppt'): jump 'sucvagabs'
		end
		killvar 'succycletmp'
	end

	cumarrtemp = 0
	cumcondslip = 0
	cumcondslip_aware = 0
	if arrsize('sparrvol') > 0:
		:cumspaloop
		!!Succubus absorption for internal locations other than womb
		if succubusflag = 1:
			if sparrloc[cumarrtemp] = 3 or sparrloc[cumarrtemp] = 12:
				sexnutrition += 25*succublvl
				succubxp += 3
				sucabscum = 1
				if sparrvol[cumarrtemp] > 0: sparrvol[cumarrtemp] = 0
			end
		end
		!!{if sparrloc[cumarrtemp] = 0 or sparrloc[cumarrtemp] = 3 or sparrloc[cumarrtemp] = 12:
			sexnutrition += 30*succublvl
			sparrvol[cumarrtemp] -= 30*succublvl
			if sparrvol[cumarrtemp] < 0: sexnutrition += sparrvol[cumarrtemp] & sparrvol[cumarrtemp] = 0
		end}
		!!{ Process spatter until it has volume or is too old in vagina. }
		if sparrvol[cumarrtemp] > 0 or (sparrloc[cumarrtemp] = 0 and sparrage[cumarrtemp] < 10):
			sparrtmpv = arrsize('$cumarrnam')
			if sparrloc[cumarrtemp] = 17:
				sparrtmpv = arrpos('cumarrcnt',sparrcnt[cumarrtemp])
				if sparrtmpv >= 0:
					!!'Found guy id <<sparrtmpv>>'
					if sparrage[cumarrtemp] < 4:
						cumarrcpt[sparrtmpv] += sparrppt[cumarrtemp]/5
					elseif sparrage[cumarrtemp] < 10:
						cumarrcpt[sparrtmpv] += sparrppt[cumarrtemp]/30
					end
				end
			elseif sparrloc[cumarrtemp] = 0:
				sparrtmpv = arrpos('cumarrcnt',sparrcnt[cumarrtemp])
				if sparrtmpv >= 0:
					!!'Found guy id' & sparrtmpv
					if sparrage[cumarrtemp] < 4:
						cumarrcpt[sparrtmpv] += sparrppt[cumarrtemp]/40
					elseif sparrage[cumarrtemp] < 10:
						cumarrcpt[sparrtmpv] += sparrppt[cumarrtemp]/60
					end
				end
			elseif sparrslc[cumarrtemp] = 1 and sparrage < 5:
				if sparrloc[cumarrtemp] = 1:
					cumarrcpt[sparrtmpv] = sparrppt[cumarrtemp]*sparrvol[cumarrtemp]/sparrage[cumarrtemp]/1000
					cumarrppt[sparrtmpv] = sparrppt[cumarrtemp]
					$cumarrnam[sparrtmpv] = $sparrnam[cumarrtemp]
					cumarrage[sparrtmpv] = sparrage[cumarrtemp]
					cumarrdel[sparrtmpv] = 1
					cumarrkno[sparrtmpv] = -1
					cumarrcon[sparrtmpv] = 0
					cumarrcnt[sparrtmpv] = sparrcnt[cumarrtemp]
				end
			elseif sparrslc[cumarrtemp] = 3 and sparrage < 5:
				if sparrloc[cumarrtemp] = 2:
					cumarrcpt[sparrtmpv] = sparrppt[cumarrtemp]*sparrvol[cumarrtemp]/sparrage[cumarrtemp]/1000
					cumarrppt[sparrtmpv] = sparrppt[cumarrtemp]
					$cumarrnam[sparrtmpv] = $sparrnam[cumarrtemp]
					cumarrage[sparrtmpv] = sparrage[cumarrtemp]
					cumarrdel[sparrtmpv] = 3
					cumarrkno[sparrtmpv] = -1
					cumarrcon[sparrtmpv] = 0
					cumarrcnt[sparrtmpv] = sparrcnt[cumarrtemp]
				elseif sparrloc[cumarrtemp] = 4:
					cumarrcpt[sparrtmpv] = sparrppt[cumarrtemp]*sparrvol[cumarrtemp]/sparrage[cumarrtemp]/1000
					cumarrppt[sparrtmpv] = sparrppt[cumarrtemp]
					$cumarrnam[sparrtmpv] = $sparrnam[cumarrtemp]
					cumarrage[sparrtmpv] = sparrage[cumarrtemp]
					cumarrdel[sparrtmpv] = 2
					cumarrkno[sparrtmpv] = -1
					cumarrcon[sparrtmpv] = 0
					cumarrcnt[sparrtmpv] = sparrcnt[cumarrtemp]
				end
			elseif sparrslc[cumarrtemp] = 5 and sparrage < 5:
				if sparrloc[cumarrtemp] = 3:
					cumarrcpt[sparrtmpv] = sparrppt[cumarrtemp]*sparrvol[cumarrtemp]/sparrage[cumarrtemp]/1000
					cumarrppt[sparrtmpv] = sparrppt[cumarrtemp]
					$cumarrnam[sparrtmpv] = $sparrnam[cumarrtemp]
					cumarrage[sparrtmpv] = sparrage[cumarrtemp]
					cumarrdel[sparrtmpv] = 2
					cumarrkno[sparrtmpv] = -1
					cumarrcon[sparrtmpv] = 0
					cumarrcnt[sparrtmpv] = sparrcnt[cumarrtemp]
				elseif sparrloc[cumarrtemp] = 5:
					cumarrcpt[sparrtmpv] = sparrppt[cumarrtemp]*sparrvol[cumarrtemp]/sparrage[cumarrtemp]/1000
					cumarrppt[sparrtmpv] = sparrppt[cumarrtemp]
					$cumarrnam[sparrtmpv] = $sparrnam[cumarrtemp]
					cumarrage[sparrtmpv] = sparrage[cumarrtemp]
					cumarrdel[sparrtmpv] = 3
					cumarrkno[sparrtmpv] = -1
					cumarrcon[sparrtmpv] = 0
					cumarrcnt[sparrtmpv] = sparrcnt[cumarrtemp]
				elseif sparrloc[cumarrtemp] = 6:
					cumarrcpt[sparrtmpv] = sparrppt[cumarrtemp]*sparrvol[cumarrtemp]/sparrage[cumarrtemp]/1000
					cumarrppt[sparrtmpv] = sparrppt[cumarrtemp]
					$cumarrnam[sparrtmpv] = $sparrnam[cumarrtemp]
					cumarrage[sparrtmpv] = sparrage[cumarrtemp]
					cumarrdel[sparrtmpv] = 3
					cumarrkno[sparrtmpv] = -1
					cumarrcon[sparrtmpv] = 0
					cumarrcnt[sparrtmpv] = sparrcnt[cumarrtemp]
				end
			end

			if sparrloc[cumarrtemp] = 0 or sparrloc[cumarrtemp] = 3 or sparrloc[cumarrtemp] = 12:
				sparrvol[cumarrtemp] -= sparrage[cumarrtemp]/2
				if sparrvol[cumarrtemp] < 0:sparrvol[cumarrtemp] = 0
			end
			if sparrloc[cumarrtemp] = 0 and cumsumvag > 60: sparrslc[cumarrtemp] = 1
			if sparrloc[cumarrtemp] = 3 and cumsumass > 60: sparrslc[cumarrtemp] = 1
			if sparrloc[cumarrtemp] = 17:
				cumcondslip += 1
				if sparridt[cumarrtemp] >= 0:
					cumcondslip_aware = 1
				end
				if sparrage[cumarrtemp] > 48:
					cumcondslip_aware = 1
					pcs_health -= rand(3,sparrage[cumarrtemp] - 45)
					'<br><b><font color="red">You feel nauseous.</font></b>'
				end
			end
			if sparrloc[cumarrtemp] ! 0 and sparrloc[cumarrtemp] ! 3 and sparrloc[cumarrtemp] ! 12 and isprok = 0 and sparrage < 5: sparrslc[cumarrtemp] += 1
			sparrage[cumarrtemp] += 1
			cumarrtemp += 1
			ctemp[0] += sparrvol[cumarrtemp]
			if sparrloc[cumarrtemp] = 0: ctemp[1] += sparrvol[cumarrtemp]
			if sparrloc[cumarrtemp] = 3: ctemp[2] += sparrvol[cumarrtemp]
		else
			gs 'cum_cleanup', 'cleandeposit', cumarrtemp
		end
		if cumarrtemp < arrsize('sparrvol'): jump 'cumspaloop'
		cumsumbod = ctemp[0]
		cumsumvag = ctemp[1]
		cumsumass = ctemp[2]
		KILLVAR 'ctemp'
	end
	
	
	!! new milkgrowday function.
	!! Not lactating yet, but there was milkdemand, meaning someone worked your nipples and breasts.
	if lactate = 0 and milkoverdemand >= 0 and prolactinlvl >= 0:
		if milkgrowday < daystart:
			prolactinlvl += milkoverdemand/200
			!! as long as your tits are not over 11 growth will happen to them. If you do not pump or no pregnancy happens, no growth will happen.
			if milkoverdemand = 0 and pregchem = 0 and tits < 11:
				temp_var = prolactinlvl - 10
				if temp_var < 0:
					prolactinlvl = 0
				end
				!! if prolactinlvl is sinking too much, the aveoli will deflate and thus the breasts growth is reverted. This only counts for induced lactation. If natural lactation occurs breasts will shrink a bit too, but stay bigger in total.
				if prolactinlvl < 75 and total_milkinduce_growth > 0:
					nbsize -= total_milkinduce_growth
					prolactinlvl -= 10
					total_milkinduce_growth = 0				
				else
					prolactinlvl -= 10
				end
				milkoverdemand = 0
				milkgrowday = daystart				
			elseif milkoverdemand > 0 and pregchem = 0 and tits < 11:
				!! inducing without ever being pregnant
				if prolactinlvl > 75 and kid <= 0:
					if total_milkinduce_growth < 8:
						total_milkinduce_growth += 1 + pumpinggrowth
						nbsize += 1 + pumpinggrowth
						pumpinggrowth = 0
					else
						pumpinggrowth = 0
					end
				!! inducing after being pregnant
				elseif prolactinlvl > 75 and kid > 0:
					if total_milkinduce_growth < (total_preg_growth/2):
						total_milkinduce_growth += 1 + pumpinggrowth
						nbsize += 1 + pumpinggrowth
						pumpinggrowth = 0
					end	
				end
				milkoverdemand = 0
			elseif milkoverdemand >= 0 and pregchem > 0 and tits < 11:
				if prolactinlvl > 75 and pregchem < 3000 and kid <= 0:
					if total_milkinduce_growth < 8:
						total_milkinduce_growth += 1 + pumpinggrowth
						nbsize += 1 + pumpinggrowth
						pumpinggrowth = 0
					else
						pumpinggrowth = 0
					end
				!! first breast growth with first pregnancy
				elseif prolactinlvl >= 75 and pregchem >= 2000 and pregchem < 3000 and kid <= 0:
					if rand(0,100) > 60:
						first_preg_growth += 1
						total_preg_growth += 1
						if total_preg_growth > total_milkinduce_growth: nbsize += 1
					end
				!! there is little chance your breast grow additional sizes if you have more kids.
				elseif prolactinlvl >= 75 and pregchem >= 2000 and pregchem < 3000 and kid > 0:
					if first_preg_growth > total_preg_growth:
						total_preg_growth += 1
						if total_preg_growth > total_milkinduce_growth: nbsize += 1
					else
						if rand(0,100) > 95:
							total_preg_growth += 1
							if total_preg_growth > total_milkinduce_growth: nbsize += 1
						end
					end
				!! inducing after being pregnant
				elseif prolactinlvl > 75 and pregchem =< 3000 and kid > 0:
					if total_milkinduce_growth < (total_preg_growth/2):
						total_milkinduce_growth += 1 + pumpinggrowth
						nbsize += 1 + pumpinggrowth
						pumpinggrowth = 0
					end	
				end
				milkoverdemand = 0
				milkgrowday = daystart
			end
			milkgrowday = daystart
		else
			milkgrowday = daystart
		end
	elseif lactate > 0 and milkoverdemand => 0 and prolactinlvl >= 0:
		lactatemm = func('$calc_lactatemm')
		!! checking if induced or not and if girl went through pregnancy already.
		if lactateinduced > 0 and kid <= 0:
			if milkgrowday < daystart:
				!! first breast growth with first pregnancy
				if prolactinlvl >= 75 and pregchem >= 2000 and pregchem < 3000 and kid <= 0:
					if rand(0,100) > 60:
						first_preg_growth += 1
						total_preg_growth += 1
						if total_preg_growth > total_milkinduce_growth: nbsize += 1
					end
				end
				if lactatemm > lactatemv:
					lactatemv += lactaterate
					temp_var = lactaterate/100
					if temp_var <= 0: temp_var = 1
					pcs_energy -= temp_var
					if lactatemv > lactatemm: lactatemv = lactatemm
				end
				if milkoverdemand > 0 and breastpumped > 0:
					!! lactationrate growing, so you make more milk the more demand there was in the day before.
					temp_var = prolactinlvl + milkoverdemand/20
					if  temp_var > 120:
						prolactinlvl += milkoverdemand/20
						!! uppon reaching a specific limit, the lactationrate will grow slower. Human body limits etc... you know
						if lactaterate > 3500:
							lactaterate += 5*(prolactinlvl/200)
						elseif lactaterate > 6000:							
							lactaterate += prolactinlvl/200
						else
							lactaterate += 10*(prolactinlvl/200)
						end
						prolactinlvl = 100
					else
						prolactinlvl = 100
					end
					'Your breasts tingle a bit more from milkproduction.'
				elseif milkoverdemand = 0 and breastpumped > 0:
					prolactinlvl = 100
				elseif milkoverdemand = 0 and breastpumped = 0:
					if lactaterate > 0:
						temp_var = lactaterate/4
						if temp_var < 1:temp_var = 0
						lactaterate = temp_var
						'Your breasts tingle a little less from milkproduction.'
					elseif lactaterate = 0:
						if pregchem < 1000:
							lactate = 0
							lactateinduced = 0
							nbsize -= total_milkinduce_growth
							'You notice that you stopped lactating.'
						else
							lactaterate = 1
						end
					else
						lactaterate = 0
					end
				end			
				milkgrowday = daystart
				milkoverdemand = 0
				breastpumped = 0
			else
				milkgrowday = daystart
				if lactatemm >= lactatemv:
					lactatemv += lactaterate
					if lactatemv > lactatemm:
						lactatemv = lactatemm
						lact_engorgement += 1
						if lact_engorgement > 2: lactatemess += 1
					end
				end
			end
			milkgrowday = daystart
		else
			if milkgrowday < daystart:
				!! there is little chance your breast grow additional sizes if you have more kids.
				if prolactinlvl >= 75 and pregchem >= 2000 and pregchem < 3000 and kid > 0:
					if first_preg_growth > total_preg_growth:
						total_preg_growth += 1
						if total_preg_growth > total_milkinduce_growth: nbsize += 1
					else
						if rand(0,100) > 95:
							total_preg_growth += 1
							if total_preg_growth > total_milkinduce_growth: nbsize += 1
						end
					end
				end				
				if lactatemm > lactatemv:
					lactatemv += lactaterate
					temp_var = lactaterate/100
					if temp_var <= 0: temp_var = 1
					pcs_energy -= temp_var
					if lactatemv > lactatemm: lactatemv = lactatemm
				end
				if milkoverdemand > 0 and breastpumped > 0:
					!! lactationrate growing, so you make more milk the more demand there was in the day before.
					temp_var = prolactinlvl + milkoverdemand/10
					if  temp_var > rand(150,200):
						prolactinlvl += milkoverdemand/20
						!! uppon reaching a specific limit, the lactationrate will grow slower. Human body limits etc... you know :D
						if lactaterate > 3500:
							lactaterate += 5*(prolactinlvl/200)
						elseif lactaterate > 6000:							
							lactaterate += prolactinlvl/200
						else
							lactaterate += 10*(prolactinlvl/200)
						end
						prolactinlvl = 100
					else
						prolactinlvl = 100
					end
					'Your breasts tingle a bit more from milkproduction.'
				elseif milkoverdemand = 0 and breastpumped > 0:
					prolactinlvl = 100
				else
					if lactaterate > 0:
						temp_var = lactaterate/8
						if temp_var < 1:temp_var = 0
						lactaterate = temp_var
						milkoverdemand = 0
						'Your breasts tingle a little less from milkproduction.'
					elseif lactaterate = 0:
						lactate = 0
						lactateinduced = 0
						if total_milkinduce_growth > 0: nbsize -= total_milkinduce_growth
						if total_preg_growth > 0:
							nbsize -= total_preg_growth
							nbsize += first_preg_growth/2
						end
						milkoverdemand = 0
						'You stopped lactating.'
					else
						lactaterate = 0
					end
				end				
				milkgrowday = daystart
				milkoverdemand = 0
				breastpumped = 0
			else
				milkgrowday = daystart
				if lactatemm >= lactatemv:
					lactatemv += lactaterate
					if lactatemv > lactatemm:
						lactatemv = lactatemm
						lact_engorgement += 1
						if lact_engorgement > 2: lactatemess += 1
					end
				end
			end
			milkgrowday = daystart
		end
		milkgrowday = daystart
	end

	if cycle <= 0:
		gs 'femcyc', 'cyc0'
	elseif cycle = 1:
		gs 'femcyc', 'cyc1'
	elseif cycle = 2:
		gs 'femcyc', 'cyc2'
	elseif cycle = 3:
		gs 'femcyc', 'cyc3'
	elseif cycle = 4:
		gs 'femcyc', 'cyc4'
	elseif cycle = 5:
		gs 'femcyc', 'preg'
	end

	dynamic $d_cycreport_update
end


!{Menstruation to Follicular. Verifies that the cycle is in the bloody phase. It then checks to see if you are done bleeding. If you are, it starts the Follicular phase. There is a small chance your follcular phase will be anywhere from a day to 3 days short, done by the random release of a boosted EggRH. Otherwise, it just starts it clean.}

if $ARGS[0] = 'cyc0':
	if mesec <= 0:
		lastmens = daystart
		cycle = 1
		mesec = 0
		if rand(0,1000) = 1000:
			EggRH = rand(20,80)
		else
			EggRH = 0
		end
		FocH += EggRH
	else
		mesec -= 1
		FocH += 1
	end
end


!{Follicular to Ovulation. It checks to see if you are on the Follicular phase. If you are, it checks to see if you are ready to ovulate. If you arent, it increases your ovulation ticker by 1, then gives a random chance to increase it again. Then it checks to see if you have ovarian problems, and if you do, decreases your ovulation ticker. When all that is done, it checks to see if you have any birth control chemical, and if its above a certain amount, it reduces your ovulation ticker.}

if $ARGS[0] = 'cyc1':
	FertEgg = 0
	if FocH <= FocH_Max:
		if pillcon <= 7000: EggRH += 1
		if rand(0,9) = 0: EggRH += 1
		FocH += 1
		temprand = rand(0,9) - sterileov + tempovbonus
		if temprand < 0: 
			EggRH -= 1
		elseif temprand > 9: 
			EggRH += 1
		end
	else
		!! the setting of the max_time can be here although it can be changed in the future
		LutH_Max = rand(312,360) & !! 13-15 days including ovulation
		!{If you are ready to ovulate, it creates a chance to double ovulate. That chance is increased by your age. Then it does the same for a triple ovulation. Then it sets the ovulation tag, ovulation hour count, and begins a ticker for the life of the eggs.}
		Temprand = rand(0,20)
		Temprand += age/15
		Temprand -= pillcon/1000
		if temprand > 20:
			EggRH += 205
			Temprand = rand(0,20)
			Temprand += age/15
			if temprand > 20: EggRH += 410
		end
		FocH = 0
		Ovulate = 24 + rand(0,20)
		cycle = 2
		ferteggage = 0
	end
end


!!{Fertilization.}

if $ARGS[0] = 'cyc2':
	can_sz = arrsize('$cumarrnam')
	if Ovulate > 0 and can_sz > 0 and UnfertEgg > 0:
		KILLVAR 'cumtime'
		KILLVAR 'cumfthname'
		KILLVAR '$wombpotfath'
		$cumfthname[0] = 'unknown'
		cumtime[0] = 0
		can_idx = 0
		cum_total = 0
!!{Compute array of unique fathers known to PC and another two arrays of unique total fathers and their individual sperm totals from all entries in cumarrcpt for that father. Also tally all cum present.}
		:FatherCumAnalyze
			!! If the current DNA is new (no occurence in the womb array), it is added to the end of $wombDNA array, and added the amount of cum to the end of cumamount array. 
			!! If exists, just increase the amount of cum in the womb.
			
			!! $wombDNA: sperm in womb potent enough to cause pregnancy
			!! wombAmount: how potent is the sperm of a guy
			!! $wombName: the name of the NPC
			y = arrsize('$wombDNA')
			if arrpos('$wombDNA',$npc_dna[$cumarrnam[can_idx]]) = -1:
				!! New guy, create place for him at the end of the array, storing his DNA, sperm amount and name
				$wombDNA[y] = $npc_dna[$cumarrnam[can_idx]]
				wombAmount[y] = cumarrcpt[can_idx]
				$wombName[y] = $cumarrnam[can_idx]
				
			else
				!! This DNA is in the womb, but does it belong to the same guy?
				x = 0
				z = 0
				:LocalizeLoop
					if $wombDNA[x] = $npc_dna[$cumarrnam[can_idx]] and $wombName[x] = $cumarrnam[can_idx]: wombAmount[x] += cumarrcpt[can_idx] & z = 1
				if z = 0 and x < (y - 1):x += 1 & jump 'LocalizeLoop'
				killvar 'x'
				if z = 0:
					!! Since the DNA and the stored name does not match at the same time, it means this is a twin situation where the twin is not in array, so put him in
					$wombDNA[y] = $npc_dna[$cumarrnam[can_idx]]
					$wombName[y] = $cumarrnam[can_idx]
					wombAmount[y] = cumarrcpt[can_idx]
				end
				killvar 'z'
			end
			killvar 'y'
			
			if cumarrkno[can_idx] = 1 and arrpos('$wombpotfath', $cumarrnam[can_idx]) < 0:$wombpotfath[arrsize('$wombpotfath')] = $cumarrnam[can_idx]
			
			!! If the guy is a known/possible element (PC know about the sex, it was actual sex, condom/pill was not used or condom was broken, etc.), he can be considered as father.
			if instr('14570',str(cumarrcon[can_idx])) > 0 and cumarrdel[can_idx] = 0 and cumarrkno[can_idx] >= 0:
				!! If guy is recorded already, increase his cumtime, else record him for the first time.
				if arrpos('$cumfthname', $cumarrnam[can_idx]) = -1:
					$cumfthname[arrsize('$cumfthname')] = $cumarrnam[can_idx]
					cumtime[arrsize('$cumfthname')] = 1
				else
					cumtime[arrpos('$cumfthname', $cumarrnam[can_idx])] += 1
				end
			end
			
			cum_total += cumarrcpt[can_idx]
			
		if can_idx < can_sz:can_idx += 1 & jump 'FatherCumAnalyze'

		!! setting the default believed father if there is no difficult choice or there is no choice
		if arrsize('$cumfthname') = 2 and cumtime[0] = 0:
			$wombpotfath[0] = $cumfthname[1]
		elseif arrsize('$cumfthname') = 1:
			$wombpotfath[0] = $cumfthname[0]
		end

!!{Create lotto of potential fathers based on each potential fathers sperm as a percentage of the total. The higher percentage of sperm from a given father, the more lotto entries he will have.}
		KILLVAR '$cumfathlotto'
		cfw_idx = 0
		cfw_sz = arrsize('wombAmount')
		:FathLottoLoop
		if cfw_idx < cfw_sz:
			cfl_ct = (wombAmount[cfw_idx] * 100) / cum_total
			if cfl_ct < 1: cfl_ct = 1
			cfl_idx = arrsize('$cumfathlotto')
			:FathLottoAdd
			if cfl_ct > 0:
				$cumfathlotto[cfl_idx] = $wombName[cfw_idx]
				$cumfatherDNA[cfl_idx] = $wombDNA[cfw_idx]
				cfl_idx += 1
				cfl_ct -= 1
				jump 'FathLottoAdd'
			end
			cfw_idx += 1
			jump 'FathLottoLoop'
		end
		killvar '$wombDNA'
		killvar '$wombName'
		killvar 'wombAmount'
		cfl_sz = arrsize('$cumfathlotto')

		egg_idx = 0
		egg_sz = UnfertEgg
		if cheat_NoPregnancy = 1:egg_idx = egg_sz
		:FertLoop
		if egg_idx < egg_sz:
!!{fert_thresh is the chance this specific egg is fertilized. Its modified by being on the pill, being sterilized, the brood curse, and so on. If it computes to less than the cum total calculated above, the egg is fertilized by a father randomly drawn from the lotto array.}
			fert_thresh = rand(1,250000)
			if pillcon < 0: pillcon = 0
			!!fert_thresh += pillcon
			if steriletu = 1: fert_thresh += fert_thresh*30
			if fert_thresh > 0 and broodcurse > 0: fert_thresh = fert_thresh / 2
			if fert_thresh <= cum_total:
				lotto_idx = rand(0, cfl_sz-1)
				UnfertEgg -= 1
				FertEgg += 1
				nextbaby = arrsize('$ChildFath')
				polkid[nextbaby] = rand(0, 1)
				$kidname[nextbaby] = 'unborn'
				kidage[nextbaby] = 0
				daykid[nextbaby] = 0
				monthkid[nextbaby] = 0
				yearkid[nextbaby] = 0
				Babyptype[nextbaby] = 0
				$kid_dna[nextbaby] = func('DNA', 'generate', $pcs_dna, $npc_dna[$cumfathlotto[lotto_idx]])
				$ChildFath[nextbaby] = $cumfathlotto[lotto_idx]
				$ChildFathDNA[nextbaby] = $cumfatherDNA[lotto_idx]
				if arrsize('$wombpotfath') = 1:
					$ChildThFath[nextbaby] = $wombpotfath[0]
				else
					$ChildThFath[nextbaby] = 'unknown'
				end
				hairkid[nextbaby] = rand(0, 3)
				eyeskid[nextbaby] = rand(0, 3)
				ChildConType[nextbaby] = cumarrcon[nextbaby]
				if fertegg > 1:
					$childtype[nextbaby] = 'paternal twin'
					$childtype[nextbaby-1] = 'paternal twin'
				else
					$childtype[nextbaby] = ''
				end
			end
			egg_idx += 1
			jump 'FertLoop'
		end
		killvar 'temp'
		tempovbonus = 0
	end

!!{Ovulation to Luteal. It checks to see if you are on the ovulation cycle. If you are, it checks you for your pillcon. If it is high enough, no egg is released. Under high concentrations of pill chemical, ovulation ticks away quicker. Otherwise, it checks to see if your ovulation hormone is high enough, and if it is it gives you an egg and drops a good chunk down on your ovulation hormone. if its still high, it drops another egg. Then it checks your ovulation hours. If its down to 0, it starts the Luteal phase. Otherwise, it adds an hour to the egg age and reduces the ovulation window by an hour.}
	if pillcon > 26000 and rand(0,400) ! 0: EggRH = 0
	:OviLoop
	If EggRH > ((UnfertEgg + FertEgg) * 150):
		UnfertEgg += 1
		EggRH -= (200 * UnfertEgg)
		jump 'OviLoop'
	end
	If ovulate <= 0:
		cycle = 3
		UnfertEgg = 0
	end
	if fertegg = 1 and ferteggage < 330:
		if rand(0,(2000 - age*20)) = 0:
			fertegg += 1
			nextbaby = arrsize('$ChildFath')
			polkid[nextbaby] = polkid[nextbaby-1]
			$kidname[nextbaby] = 'unborn'
			kidage[nextbaby] = 0
			daykid[nextbaby] = 0
			monthkid[nextbaby] = 0
			yearkid[nextbaby] = 0
			Babyptype[nextbaby] = Babyptype[nextbaby-1]
			$ChildFath[nextbaby] = $ChildFath[nextbaby-1]
			$ChildFathDNA[nextbaby] = $ChildFathDNA[nextbaby-1]
			$kid_dna[nextbaby] = $kid_dna[nextbaby-1]
			hairkid[nextbaby] = hairkid[nextbaby-1]
			eyeskid[nextbaby] = eyeskid[nextbaby-1]
			cumarrcon[nextbaby] = cumarrcon[nextbaby-1]
			$childtype[nextbaby] = 'identical twin'
			$childtype[nextbaby-1] = 'identical twin'
		end
	end
	ferteggage += 1
	Ovulate -= 1
	LutH += 1
end


!{Luteal to Menstration or Pregnancy. First it verifies this is the Luteal phase. Then it adds an hour to the age of the eggs. Then if there is a fertized egg, it rolls a random chance. if the egg age is low, it checks for risk of an entopic pregnancy. This is increased with older age and if you have a tubal ligation sterilization.}
!{If there is a ectopic pregnancy, it sets the first unborn baby in the array to this. Ectopic pregnancies occur when the fertilized egg implants "too early" after fertlization (and therefore in the fallopian tube). The risk is higher with age, but this is also a common complication with certain forms of birth control, notably tubal ligation. Each egg could be different. It then removes the fertilized egg, adds an embryo, Then it adds some pregnancy hormone if you arent already pregnant, and calls you officially pregnant.}
!{Otherwise, it adds your womb sterility factor to the imp_rand. Then it checks if your imp_rand crosses a threshold for implantation. Younger women implant easier. It then sets the next baby to the next unimplanted baby in your kid array. It registers the kid as a normal pregnancy, removes a fertilized egg and adds an embryo. Then it adds some pregnancy hormone if you arent already pregnant, and calls you officially pregnant.}

if $ARGS[0] = 'cyc3':
	if fertegg = 1 and ferteggage < 330:
		if rand(0,(2000 - age*20)) = 0:
			fertegg += 1
			nextbaby = arrsize('$ChildFath')
			polkid[nextbaby] = polkid[nextbaby-1]
			$kidname[nextbaby] = 'unborn'
			kidage[nextbaby] = 0
			daykid[nextbaby] = 0
			monthkid[nextbaby] = 0
			yearkid[nextbaby] = 0
			Babyptype[nextbaby] = Babyptype[nextbaby-1]
			$ChildFath[nextbaby] = $ChildFath[nextbaby-1]
			$ChildFathDNA[nextbaby] = $ChildFathDNA[nextbaby-1]
			$kid_dna[nextbaby] = $kid_dna[nextbaby-1]
			hairkid[nextbaby] = hairkid[nextbaby-1]
			eyeskid[nextbaby] = eyeskid[nextbaby-1]
			cumarrcon[nextbaby] = cumarrcon[nextbaby-1]
			$childtype[nextbaby] = 'identical twin'
			$childtype[nextbaby-1] = 'identical twin'
		end
	end
	ferteggage += 1
	implant_idx = 0
	implant_sz = arrsize('Babyptype')

	:implant_loop
	if implant_idx < implant_sz:

		if Babyptype[implant_idx] = 0:
			imp_rand = rand(0,120000)

			if ferteggage < 120 and broodcurse <= 0:
				imp_rand += 170
				imp_rand -= age * 10
				if steriletu = 1: imp_rand -= 200

				if imp_rand <= 0:
					Babyptype[implant_idx] = 2
					FertEgg -= 1
					babyembryo += 1
					PregChem = rand(10,30)
					if preg = 0: preg = 1
					implant_day = daystart
					implant_hour = hour

				end

			else
				imp_rand += sterilewb
				imp_rand -= tempwbbonus
				if broodcurse > 0 and ferteggage >= 120: imp_rand = 0

				if imp_rand <= (1200 - (age * 7)):
					Babyptype[implant_idx] = 1
					FertEgg -= 1
					babyembryo += 1
					PregChem = rand(10,30)
					if preg = 0: preg = 1
					implant_day = daystart
					implant_hour = hour

				end
				tempwbbonus = 0

			end

		end

		implant_idx += 1
		jump 'implant_loop'

	end

!!{Then, it progresses the Luteal phase. It checks to see if you are pregnant. If you are, it ends the cycle and sets preg if your Luteal hormone is at the max as well as cleans out any unimplanted eggs. Otherwise, it just progresses pregnancy chemical and Luteal Hormone. If you arent pregnant, it checks your Luteal hormone. If its at the maximum, it adds 3-5 days of bleeding, clears out your unimplanted eggs, and clears out your Luteal hormone, or ends your cycle if you are past your menopausal age. Otherwise it will just progress the Luteal hormone.}
	if LutH > LutH_Max:
		rej_idx = 0
		rej_sz = arrsize('Babyptype')
		:lutcycloop
		if rej_idx < rej_sz:
			if Babyptype[rej_idx] = 0:
				KILLVAR 'polkid',tempbabyi
				KILLVAR '$kidname',tempbabyi
				KILLVAR 'kidage',tempbabyi
				KILLVAR 'daykid',tempbabyi
				KILLVAR 'monthkid',tempbabyi
				KILLVAR 'yearkid',tempbabyi
				KILLVAR 'Babyptype',tempbabyi
				KILLVAR '$ChildFath',tempbabyi
				KILLVAR '$ChildThFath',tempbabyi
				KILLVAR 'hairkid',tempbabyi
				KILLVAR 'eyeskid',tempbabyi
				KILLVAR 'cumarrcon',tempbabyi
				FertEgg -= 1
			end
			rej_idx += 1
			jump 'lutcycloop'
		end
		LutH = 0
		if preg = 1:
			cycle = 5
		elseif menoage <= age:
			KILLVAR '$wombpotfath'
			killvar '$cumfthname'
			killvar '$cumfthusedname'
			killvar 'cumtime'
			cycle = 6
		else
			KILLVAR '$wombpotfath'
			killvar '$cumfthname'
			killvar '$cumfthusedname'
			killvar 'cumtime'
			!! the setting of the max_time can be here although it can be changed in the future
			FocH_Max = rand(312,360) & !! 13-15 days including menstruation
			temprand = rand(0,10)
			if pillcon >= 38000 or rand(1,24) = 1:
				EggRH = 0
				cycle = 1
				mesec = 0
			else
				cycle = 0
				killvar 'abortionbirthdate'
				if cyccustom = 1: daylastperiod = daystart
				firstmens = daystart
				temprand = rand(0,10)
				if temprand = 0 and pillcon < 10000:
					mesec = rand(104,136) & !! 120
				elseif temprand < 9 and pillcon < 15000:
					mesec = rand(76,104) & !!  96
				elseif pillcon < 20000:
					mesec = rand(52,76) & !! 72
				else
					mesec = rand(44,52) & !! 48
				end
			end
		end
	else
		if preg = 1:PregChem += 1+pregspeedcheat
		if rand(0,100) < 100: LutH += 1
	end
end

!{Recovery to Follicular. It checks to see if you are in the recovery phase after a pregnancy. If you are, it checks to see if you still have recovery hormone. If you dont, it sets you into the follicular phase with a chance of a boosted Egg releasing hormone. Otherwise it decreases your recovery hormone with a chance to decrease it twice.}

if $ARGS[0] = 'cyc4':
	if RecovH <= 0:
		cycle = 1
		if cyccustom = 1:
			knowpregloss = 0
			knowpregrecover = 0
		end
		if rand(0,1000) = 1000:
			EggRH = rand(20,80)
		else
			EggRH = 0
		end
		FocH = EggRH
	else
		RecovH -= 1
		if rand(0,10) = 0: RecovH -= 1
	end
end


!{Pregnancy Progression. It checks to see if you are in the pregnancy phase of a cycle. If you are, it progresses your pregnancy chemical. Then it gives a fluxuation of possible due dates. If you cross the due date threshold, you enter labor, marked by preg = 2. Other milestones will also be placed in here, including body deformations. Right now this is mostly an empty placeholder.}

if $ARGS[0] = 'preg':
	if fertegg = 1 and ferteggage < 330:
		if rand(0,(2000 - age*20)) = 0:
			babyembryo += 1
			PregChem += rand(10,30)
			nextbaby = arrsize('$ChildFath')
			polkid[nextbaby] = polkid[nextbaby-1]
			$kidname[nextbaby] = 'unborn'
			kidage[nextbaby] = 0
			daykid[nextbaby] = 0
			monthkid[nextbaby] = 0
			yearkid[nextbaby] = 0
			Babyptype[nextbaby] = Babyptype[nextbaby-1]
			$ChildFath[nextbaby] = $ChildFath[nextbaby-1]
			hairkid[nextbaby] = hairkid[nextbaby-1]
			eyeskid[nextbaby] = eyeskid[nextbaby-1]
			cumarrcon[nextbaby] = cumarrcon[nextbaby-1]
			$childtype[nextbaby] = 'identical twin'
			$childtype[nextbaby-1] = 'identical twin'
		end
	end
	PregChem += (1+pregspeedcheat)
	temprand = rand(-400,800)
	temprand -= (babyembryo-1)*588
	if PregChem > 6573 + temprand and preg ! 2:
		'A sharp pain pierces your abdomen, and you feel something flow down your legs. Your water has broken!'
		$cycreport_txt = 'In labour'
		arrmodtmp =arrsize('$ChildFath')
		arrmodtmp -= (babyembryo+1)
		:babyfinalpreploop
		if arrmodtmp < arrsize('$ChildFath') and daykid[arrmodtmp] = 0:
			daykid[arrmodtmp] = 42
			$ChildThFath[arrmodtmp] = $wombthfath
			arrmodtmp += 1
			jump 'babyfinalpreploop'
		end
		KILLVAR '$wombpotfath'
		KILLVAR '$wombthfath'
		preg = 2
		pregminut = totminut + 1440
		if babyembryo > 1:
			'Your babies are coming...'
		else
			'Your baby is coming...'
		end
		if PregChem < 3885:
			'Way too early!'
		elseif PregChem < 5229:
			'Very early!'
		elseif PregChem < 6069:
			'Early.'
		elseif PregChem > 6959:
			'Late.'
		elseif PregChem > 7245:
			'Very Late!'
		end
		'You need to get to a clinic.'
	end
	if PregChem > 3887:
		if lactate <= 0:
			'You begin lactating'
			lactate = 1
			lactatemv = 0
			lactatemm = func('$calc_lactatemm')
			lacaterate = 10
			prolactinlvl = 150
		else
			if lactate < 1: lactate = 1
		end
	end
	if PregChem > 1000:
		if prolactinlvl < 100 and lactate <= 0:
			if rand(0,100) > 50:
				prolactinlvl +=1
			end
		end
	end
	if PregChem > 2203:
		if pregchem > 2853 or kid > 0:
			if rand(0,7) = 0: dynamic $d_pregmovement
		else
			if rand(0,500) = 0: dynamic $d_pregmovement
		end
	end
end

--- femcyc ---------------------------------