glife/locations/shortgs.qsrc

# shortgs

!! following function counts the number of guys which PC slept with. 
!! use func('shortgs','guy') or func('shortgs','guy',X) for subset (X can be 'A','B','C','AB','AC','BC')
if $ARGS[0] = 'guy':
	r_sht=0
	if $ARGS[1] = '': $temptask = 'ABC' else $temptask = $ARGS[1]
	:loop_shtty
	$temptaskchar = mid($temptask,1,1) 
	$temptask = mid($temptask,2,len($temptask)-1)
	s_sht=0
	:loop_shya
	if s_sht<=dyneval("result = <<$temptaskchar>>arraynumber"):
		s_sht += 1
		if npc_sex['<<$temptaskchar>><<s_sht>>'] > 0: r_sht = r_sht + iif(npc_gender['<<$temptaskchar>><<s_sht>>'] = 0,1,0)
		jump 'loop_shya'
	end
	if len($temptask) > 0:jump 'loop_shtty'
	result = r_sht
	killvar 'r_sht'
	killvar '$temptask'
	killvar '$temptaskchar'
	killvar 's_sht'
end &! --- guy ---

!! following function counts the number of girls which PC slept with.
!! use func('shortgs','girl') or func('shortgs','girl',X) for subset (X can be 'A','B','C','AB','AC','BC')
if $ARGS[0] = 'girl':
	r_sht=0
	if $ARGS[1] = '': $temptask = 'ABC' else $temptask = $ARGS[1]
	:loop_shttl
	$temptaskchar = mid($temptask,1,1) 
	$temptask = mid($temptask,2,len($temptask)-1)
	s_sht=0
	:loop_shl
	if s_sht<=dyneval("result = <<$temptaskchar>>arraynumber"):
		s_sht += 1
		if npc_sex['<<$temptaskchar>><<s_sht>>'] > 0: r_sht = r_sht + iif(npc_gender['<<$temptaskchar>><<s_sht>>'] = 1,1,0)
		jump 'loop_shl'
	end
	if len($temptask) > 0: jump 'loop_shttl'
	result = r_sht
	killvar 'r_sht'
	killvar '$temptask'
	killvar '$temptaskchar'
	killvar 's_sht'
end &! --- girl ---

!! following procedure should be used when PC gets naked, but it should be paired with the reverse procedure 
!! use gs 'shortgs','undress'
if $ARGS[0] = 'undress':
	gs 'clothing','strip'
	gs 'underwear', 'remove'
end &! --- undress ---

!! reverse procedure, it can be modified for lose or stolen panties later. 
!! use gs 'shortgs','dress'
if $ARGS[0] = 'dress':
	gs 'clothing','wear_last_worn'
	gs 'underwear', 'wear'
end &! --- dress ---

!! procedure, which prevents PC to leave a room naked.  
!! use gs 'shortgs','checkdress',' <<$loc>>,<<$loc_arg>> '  or equivalent
if $ARGS[0] = 'checkdress':
	if $clothingworntype = 'nude':
		msg '<b><font color="red">You need to get dressed before going out.</font></b>'
		dynamic 'gt <<$ARGS[1]>>'
	end
end &! --- checkdress ---

!! this is an integer sqrt function
!! call func('shortgs','sqrt', n)
if $ARGS[0] = 'sqrt':
	sqrtnum = ARGS[1]
	if sqrtnum = 0: result = 0 & exit
	sqrtn = sqrtnum/2 + 1
	sqrtn1 = (sqrtn + sqrtnum / sqrtn) / 2
:sqrtloop
	if sqrtn1 < sqrtn:
		sqrtn = sqrtn1
		sqrtn1 = (sqrtn + sqrtnum / sqrtn) / 2
		jump 'sqrtloop'
	end
	result = sqrtn  
end

!! this function calculates modul of given arguments as it was coordinates in cartezian systeme
!! use func('shortgs','modul',n1,n2,..n8)
if $ARGS[0] = 'modul':
	modul_sum = ARGS[1]*ARGS[1]+ARGS[2]*ARGS[2]+ARGS[3]*ARGS[3]+ARGS[4]*ARGS[4]+ARGS[5]*ARGS[5]+ARGS[6]*ARGS[6]+ARGS[7]*ARGS[7]+ARGS[8]*ARGS[8]
	result = func('shortgs','sqrt',modul_sum)
	killvar 'modul_sum'
end
!! day of week 1 - Monday .. 7 - Sunday
if $ARGS[0] = 'dow':
	if ARGS[1]=0:
		D_dow = day
		M_dow = month
		Y_dow = year
	else
		D_dow = ARGS[3]
		M_dow = ARGS[2]
		Y_dow = ARGS[1]
	end
	dow_a = (14 - M_dow) / 12
	dow_Y = Y_dow - dow_a
	dow_M = M_dow + 12*dow_a - 2
	dummy = (D_dow + dow_y + dow_y/4 - dow_y/100 + dow_y/400 + (31*dow_m)/12) mod 7
	if dummy = 0: dummy = 7
	result = dummy
end
!! day of year
!! use xdoy = func('shortgs','doy',year,month,day) 
if $ARGS[0] = 'doy':
	doy_N1 = 275 * ARGS[2] / 9
	doy_N2 = (ARGS[2] + 9) / 12
	doy_N3 = 1 + (ARGS[1] - 4 * (ARGS[1] / 4) + 2) / 3
	result = doy_N1 - (doy_N2 * doy_N3) + ARGS[3] - 30
end
if $ARGS[0] = 'mk1':
	gs 'saveposition'
	*clr & cla
	$mk_subst['0'] = 'M' & $mk_subst['1'] = 'F' & $mk_subst['2'] = 'O' & $mk_subst['3'] = 'L' & $mk_subst['4'] = 'R' & $mk_subst['5'] = 'P'
	'<center><font face="courier" size=1>'
	'<table border = 1>'
	'<tr><th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th><th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th>
	<th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th><th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th></tr>'
	i = ArrSize('$MenCal')

	empty0 = week + 29 - i - 1

	empty1 = min(28,empty0)
	full1 = max(0,28 - empty0)

	empty2 = max(0,empty0-28)
	full2 = i - full1
	empty3 = 28 - empty2 - full2
	count=0

	$tabmc = '<tr>'
:tabmcl1
	if empty1 > 0: empty1 -=1 & $tabmc +='<td>&nbsp</td>' & jump 'tabmcl1'
:tabmcl2
	if full1 > 0: 
		full1 -=1 
		if $MenCal[count]='0': $tabmc +='<td bgcolor="red"><<$mk_subst[$MenCal[count]]>></td>' else $tabmc +='<td><<$mk_subst[$MenCal[count]]>></td>'
		count +=1
		jump 'tabmcl1'
	end
	$tabmc += '</tr><tr>'
:tabmcl3
	if empty2 > 0: empty2 -=1 & $tabmc +='<td>&nbsp</td>' & jump 'tabmcl3'
:tabmcl4
	if full2 > 0:
		full2 -=1
		if $MenCal[count]='0': $tabmc +='<td bgcolor="red"><<$mk_subst[$MenCal[count]]>></td>' else $tabmc +='<td><<$mk_subst[$MenCal[count]]>></td>'
		count +=1
		jump 'tabmcl4'
	end
:tabmcl5
	if empty3 > 0: empty3 -=1 & $tabmc +='<td></td>' & jump 'tabmcl5'
	$tabmc += '</tr><table></font></center>'
	$tabmc
	act 'Back': gt 'restoreposition'
end

!! use gs 'shortgs','mk'
if $ARGS[0] = 'mk':
	gs 'saveposition'
	*clr & cla
	copyarr '$MenCalCopy','$MenCal'
	length_of_month_field = arrsize('$MenCalCopy')
	if daystart - firstmens > 40:
		mensnotfound = 1
		i = 0
:tabmcfm
		if $MenCalCopy[length_of_month_field-i] = '0' and $MenCalCopy[length_of_month_field-i-1] = '3': mensnotfound = 0
		i += 1
		if i < length_of_month_field and mensnotfound = 1: jump 'tabmcfm'
		if mensnotfound = 0:
			firstmens = daystart - i + 1
		end
	end
	i=1
:tabmcc1
	if daystart - firstmens < 40:
		if (daystart - firstmens + i) = 28:
			$MenCalCopy[] = ' bgcolor="#df2020"'
		elseif (daystart - firstmens + i) = 29:
			$MenCalCopy[] = ' bgcolor="#df3030"'
		elseif (daystart - firstmens + i) = 30:
			$MenCalCopy[] = ' bgcolor="#df4040"'
		elseif (daystart - firstmens + i) = 12:
			$MenCalCopy[] = ' bgcolor="#d8ff00"'
		elseif (daystart - firstmens + i) = 13:
			$MenCalCopy[] = ' bgcolor="#d0ff00"'
		elseif (daystart - firstmens + i) = 14:
			$MenCalCopy[] = ' bgcolor="#c8ff00"'
		elseif (daystart - firstmens + i) = 15:
			$MenCalCopy[] = ' bgcolor="#c0ff00"'
		elseif (daystart - firstmens + i) = 16:
			$MenCalCopy[] = ' bgcolor="#d0ff00"'
		elseif (daystart - firstmens + i) = 12+28:
			$MenCalCopy[] = ' bgcolor="#d8ff00"'
		elseif (daystart - firstmens + i) = 13+28:
			$MenCalCopy[] = ' bgcolor="#d0ff00"'
		elseif (daystart - firstmens + i) = 14+28:
			$MenCalCopy[] = ' bgcolor="#c8ff00"'
		elseif (daystart - firstmens + i) = 15+28:
			$MenCalCopy[] = ' bgcolor="#c0ff00"'
		elseif (daystart - firstmens + i) = 16+28:
			$MenCalCopy[] = ' bgcolor="#d0ff00"'
		else
			$MenCalCopy[] = ''
		end
		i += 1
		if i < 40: jump 'tabmcc1'
	end
	i = length_of_month_field
:tabmcc2
	if i > 0:
		if $MenCalCopy[i-1] = '2' and i = 1 : $MenCalCopy[i-1] = ' bgcolor="#c0ff00"'
		if $MenCalCopy[i-1] = '2' and $MenCalCopy[i-2] = '2': $MenCalCopy[i-1] = ' bgcolor="#c0ff00"'
		if $MenCalCopy[i-1] = '2' and $MenCalCopy[i-2] = '1': $MenCalCopy[i-1] = ' bgcolor="#80ff00"' & $MenCalCopy[i-2] = ' bgcolor="#90ff00"' & $MenCalCopy[i-3] = ' bgcolor="#a0ff00"' & $MenCalCopy[i-4] = ' bgcolor="#b0ff00"' & $MenCalCopy[i-5] = ' bgcolor="#c0ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) < 12: $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) = 12: $MenCalCopy[i-1] =' bgcolor="#b0ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) = 13: $MenCalCopy[i-1] =' bgcolor="#a0ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) = 14: $MenCalCopy[i-1] =' bgcolor="#90ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) = 15: $MenCalCopy[i-1] =' bgcolor="#80ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) > 15: $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '0': $MenCalCopy[i-1] =' bgcolor="#df2020"'
		if $MenCalCopy[i-1] = '3': $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '4': $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '5': $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '6': $MenCalCopy[i-1] =''
		i -= 1
		jump 'tabmcc2'
	end

	cur_day_doy = func('shortgs','doy',year,month,day)
	if month = 1:
		dif_days = cur_day_doy + 30
		prev_month = 12
		prev_month_length = 31
	else
		prev_month = month - 1
		dif_days = cur_day_doy - func('shortgs','doy',year,prev_month,1)
		prev_month_length = func('shortgs','doy',year,month,1) - func('shortgs','doy',year,prev_month,1)
	end
	first_month_first_day_week = week - (dif_days mod 7)
	first_month_first_day_index = length_of_month_field -1 - dif_days
	r = first_month_first_day_index
	if first_month_first_day_week < 1: first_month_first_day_week += 7
	i = 42
:tabmc21
	$mk1_mdays[] = '&nbsp' & i -= 1 & if i > 0: jump 'tabmc21'
	i = 0
:tabmc21a
	$mk1_mdays[i+first_month_first_day_week-1] = $str(i+1) 
	i += 1 
	if i < prev_month_length: jump 'tabmc21a'

	$prev_month_name = $mid($monthName[prev_month],1,1) + '<br>' + $mid($monthName[prev_month],2,1) + '<br>' + $mid($monthName[prev_month],3,1)

	k = 0
	$tabmc ='<center><font face="courier" size=5>'
	$tabmc +='<table border = 1 cellspacing="0" cellpadding="5">'
	$tabmc +='<tr><th>Month</th><th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th></tr>'
	month_weeks = (first_month_first_day_week + prev_month_length + 5)/7 - 1
	i = month_weeks
:tabmc22
	$tabmc +='<tr>'
	j = 7
	if i = month_weeks:$tabmc +='<td rowspan="<<month_weeks+1>>" align = "center"><<$prev_month_name>></td>'
:tabmc23
	if j > 0: 
		j -=1 
		if $mk1_mdays[k]='&nbsp':
			$tabmc +='<td><<$mk1_mdays[k]>></td>'
		else
			$tabmc +='<td<<$MenCalCopy[r]>> ><<$mk1_mdays[k]>></td>'
			r +=1
		end
		k +=1
		jump 'tabmc23' & !<<$MenCalCopy[r]>> 
	end
	if i > 0: i -=1 & $tabmc +='</tr>' & jump 'tabmc22'
	killvar '$mk1_mdays'
	killvar '$mk1_mdays_color'

!! current month
	if month = 12:
		dif_days = day - 1
		cur_month = month
		cur_month_length = 31
	else
		dif_days = day - 1
		cur_month_length = func('shortgs','doy',year,month+1,1) - func('shortgs','doy',year,month,1)
	end
	second_month_first_day_week = week - (dif_days mod 7)
	second_month_first_day_index = length_of_month_field -1 - dif_days
	
	if second_month_first_day_week < 1: second_month_first_day_week += 7
	i = 42
	:tabmc31
	$mk1_mdays[] = '&nbsp' & i -= 1 & if i > 0: jump 'tabmc31'
	i = 0
:tabmc31a
	$mk1_mdays[i+second_month_first_day_week-1] = $str(i+1) 
	i += 1 
	if i < cur_month_length: jump 'tabmc31a'

	$cur_month_name = $mid($monthName[month],1,1) + '<br>' + $mid($monthName[month],2,1) + '<br>' + $mid($monthName[month],3,1)

	k = 0
	month_weeks = (second_month_first_day_week + cur_month_length + 5)/7 - 1
	i = month_weeks
:tabmc32
	$tabmc +='<tr>'
	j = 7
	if i = month_weeks:$tabmc +='<td rowspan="<<month_weeks+1>>" align = "center"><<$cur_month_name>></td>'
:tabmc33
	if j > 0: 
		j -=1
		if $mk1_mdays[k]='&nbsp':
			$tabmc +='<td><<$mk1_mdays[k]>></td>'
		else
			if day + second_month_first_day_week - 2 = k: $tabmc +='<td<<$MenCalCopy[r]>> ><u><b><<$mk1_mdays[k]>></b></u></td>' else $tabmc +='<td<<$MenCalCopy[r]>> ><<$mk1_mdays[k]>></td>'
			r +=1
		end
		k +=1 
		jump 'tabmc33'
	end
	if i > 0: i -=1 & $tabmc +='</tr>' & jump 'tabmc32'
	killvar '$mk1_mdays'
	killvar '$mk1_mdays_color'
	
!! next month
	if month = 12:
		dif_days = 31 - day + 1
		next_month = 1
		next_month_length = 31
	elseif month = 11:
		dif_days = 30 - day + 1
		next_month = 12
		next_month_length = 31
	else
		next_month = month + 1
		dif_days = cur_month_length - day + 1
		next_month_length = func('shortgs','doy',year,month+2,1) - func('shortgs','doy',year,month+1,1)
	end
	next_month_first_day_week = week + (dif_days mod 7)
	next_month_first_day_index = length_of_month_field -1 - dif_days
	
	if next_month_first_day_week < 1: next_month_first_day_week += 7
	i = 35
:tabmc41
	$mk1_mdays[] = '&nbsp' & i -= 1 & if i > 0: jump 'tabmc41'
	i = 0
:tabmc41a
	$mk1_mdays[i+next_month_first_day_week-1] = $str(i+1) 
!!	if next_month_first_day_index + i >= 0: $mk1_mdays[i+next_month_first_day_week-1] += $mk_subst[$MenCal[second_month_first_day_index + i]]
	i += 1 
	if i < next_month_length: jump 'tabmc41a'

	$next_month_name = $mid($monthName[next_month],1,1) + '<br>' + $mid($monthName[next_month],2,1) + '<br>' + $mid($monthName[next_month],3,1)

	k = 0
	month_weeks = (next_month_first_day_week + next_month_length + 5)/7 - 1
	i = month_weeks
:tabmc42
	$tabmc +='<tr>'
	j = 7
	if i = month_weeks:$tabmc +='<td rowspan="<<month_weeks+1>>" align = "center"><<$next_month_name>></td>'
:tabmc43
	if j > 0: 
		j -=1
		if $mk1_mdays[k]='&nbsp':
			$tabmc +='<td><<$mk1_mdays[k]>></td>'
		else
			$tabmc +='<td<<$MenCalCopy[r]>> ><<$mk1_mdays[k]>></td>'
			r +=1
		end
		k +=1
		jump 'tabmc43'
	end
	if i > 0: i -=1 & $tabmc +='</tr>' & jump 'tabmc42'
	killvar '$mk1_mdays'

	
	$tabmc += '</tr><table></font></center>'
	$tabmc
	act 'Back': gt 'restoreposition'
end

!! gs 'shortgs','fonts'
if $ARGS[0] = 'fonts':
	if $ARGS[1] = 'refresh': 
		jump 'fontsloop'
	else
		$dynamicreturn = $ARGS[1]
		$OpenPhraseSave = $ARGS[2]
		$ClosePhraseSave = $ARGS[3]
	end
	gs 'saveposition'
	$fontlist[] = 'Lucida' & $fontlist[] = 'Ariel' & $fontlist[] = 'Tahoma' & $fontlist[] = 'Verdana' & $fontlist[] = 'Courier New' & $fontlist[] = 'Courier' & $fontlist[] = 'Georgia' & $fontlist[] = 'Times New Roman' & $fontlist[] = 'Garamond' & $fontlist[] = 'Bookman' & $fontlist[] = 'Times New Roman' & $fontlist[] = 'Times' & $fontlist[] = 'Comic Sans MS' & $fontlist[] = 'Trebuchet MS' & $fontlist[] = 'Impact' & $fontlist[] = 'BankGothic'
	$fontcolor[] = 'aqua' & $fontcolor[] = 'black' & $fontcolor[] = 'blue' & $fontcolor[] = 'magenta' & $fontcolor[] = 'green' & $fontcolor[] = 'gray' & $fontcolor[] = 'lime' & $fontcolor[] = 'maroon' & $fontcolor[] = 'navy' & $fontcolor[] = 'olive' & $fontcolor[] = 'purple' & $fontcolor[] = 'red' & $fontcolor[] = 'silver' & $fontcolor[] = 'teal' & $fontcolor[] = 'white' & $fontcolor[] = 'yellow' 
	i = 15
:fontsloop0
	if $CurFont = $fontlist[i]: curfont = i
	if $CurColor = $fontcolor[i]: curcolor = i
	i -= 1
	if i > 0: jump 'fontsloop0'
	jump 'fontsloop1'
:fontsloop
	$OpenPhrase = '<font size="<<CurFontSize>>" color="<<$CurColor>>" face="<<$CurFont>>" >'+$CurBold+$CurItalic
	$ClosePhrase = $CurItalicBack+$CurBoldBack+'</font>'
:fontsloop1
	*clr & cla
	$OpenPhrase+'Current font is <<$CurFont>> Size <<CurFontSize>>, the color is <<$CurColor>>, the Bold is <<iif($CurBold = ''<b>'',''On'',''Off'')>> and Italic is <<iif($CurItalic = ''<i>'',''On'',''Off'')>>'+$ClosePhrase
	'<a href="exec: curfont = (curfont + 1) mod 16 & $CurFont = $fontlist[curfont] & gs ''shortgs'',''fonts'',''refresh'' ">Change the Font</a>'
	'<a href="exec: curcolor = (curcolor + 1) mod 16 & $CurColor = $fontcolor[curcolor] & gs ''shortgs'',''fonts'',''refresh'' ">Change the Color</a>'
	'<a href="exec:$CurBold = iif($CurBold ! ''<b>'',''<b>'','' '') & $CurBoldBack = iif($CurBold = ''<b>'',''</b>'','' '') & gs ''shortgs'',''fonts'',''refresh'' ">Change the BoldState</a>'
	'<a href="exec:$CurItalic = iif($CurItalic ! ''<i>'',''<i>'','' '') & $CurItalicBack = iif($CurItalic = ''<i>'',''</i>'','' '') & gs ''shortgs'',''fonts'',''refresh'' ">Change the ItalicState</a>'
	'<a href="exec:CurfontSize -= 1 & gs ''shortgs'',''fonts'',''refresh'' ">Decrease the Font</a>&nbsp&nbsp&nbsp<a href="exec:CurfontSize += 1 & gs ''shortgs'',''fonts'',''refresh'' ">Increase the font</a>'

	act 'Back': 
		killvar '$fontlist'
		killvar '$fontcolor'
		dynamic '<<$OpenPhraseSave>> = $OpenPhrase'
		dynamic '<<$ClosePhraseSave>> = $ClosePhrase'
		if $dynamicreturn ! '': dynamic 'dynamic <<$dynamicreturn>>'
		gt 'restoreposition'
	end
end

!! use gs 'shortgs','ncp_update'
if $ARGS[0] = 'ncp_update':
	copyarr 'copy_npc_QW','npc_QW'
	copyarr 'copy_npc_rel','npc_rel'
	copyarr 'copy_npc_love','npc_love'
	copyarr '$copy_npc_usedname','$npc_usedname'
	gs 'npcstatic1'
	gs 'npcstatic2'
	gs 'npcstatic3'
	gs 'npcstatic4'
	gs 'npcstatic5'
	i = arrsize('copy_npc_QW')
	j = 1
:loopnpcupdate
	$boy = 'A<<j>>'
	npc_QW[$boy] = copy_npc_QW[$boy]
	npc_rel[$boy] = copy_npc_rel[$boy]
	npc_love[$boy] = copy_npc_love[$boy]
	$npc_usedname[$boy] = $copy_npc_usedname[$boy]
	j += 1
	if j <= i: jump 'loopnpcupdate'
	killvar 'copy_npc_QW'
	killvar 'copy_npc_rel'
	killvar 'copy_npc_love'
	killvar '$copy_npc_usedname'
end

!! this function returns the numeric index of the array element which is indexed by string value.
!! call func('shortgs', 'get_me_index', 'name of array','string index')
!! the array can be both numeric or string: Be aware, for the search is used the value 'SearchTag' for string arrays and -2147483648 for numeric arrays.
!! if the array consists such value, the fuction can mess the array content and return wrong value
!! changed the value for detecting numeric element from -999 to -2147483648 (November 2020)
if $ARGS[0] = 'get_me_index':
	$test = '<<$ARGS[1]>>[''<<$ARGS[2]>>'']'
	testas0 = arrsize('<<$ARGS[1]>>')
	if $mid($test,1,1)='$':
		$temp=dyneval('$result=<<$test>>')
		dynamic '<<$test>> = ''SearchTag'' '
		testas1 = arrsize('<<$ARGS[1]>>')
		if testas0 = testas1:
			if Enable_Android = 1:
				res = dyneval('result = arrpos(''<<$ARGS[1]>>'',''SearchTag'',0)')
			else
				res = dyneval('result = arrpos(0,''<<$ARGS[1]>>'',''SearchTag'')')
			end
			dynamic '<<$test>> = ''<<$temp>>'' '
		else
			res = -1
			killvar '<<$ARGS[1]>>',testas0
		end
	else
		temp=dyneval('result=<<$test>>')
		dynamic '<<$test>> = -2147483648'
		testas1 = arrsize('<<$ARGS[1]>>')
		if testas0 = testas1:
			if Enable_Android = 1:
				res = dyneval('result = arrpos(''<<$ARGS[1]>>'',-2147483648,0)')
			else
				res = dyneval('result = arrpos(0,''<<$ARGS[1]>>'',-2147483648)')
			end
			dynamic '<<$test>> = <<temp>>'
		else
			res = -1
			killvar '<<$ARGS[1]>>',testas0
		end
	end
	result = res
end


!! call gs 'shortgs', 'remove_array_element', 'name of array','string index'
if $ARGS[0] = 'remove_array_element':
	i = func('shortgs', 'get_me_index', $ARGS[1],$ARGS[2])
	killvar '<<$ARGS[1]>>',i
end

if $ARGS[0] = 'testsize':

	arrsize('$npc_dad')
	arrsize('$npc_dna')
	arrsize('$npc_firstname')
	arrsize('$npc_firstpart')
	arrsize('$npc_kidpater')
	arrsize('$npc_lastname')
	arrsize('$npc_lastpart')
	arrsize('$npc_mom')
	arrsize('$npc_nickname')
	arrsize('$npc_notes')
	arrsize('$npc_PersType')
	arrsize('$npc_pic')
	arrsize('$npc_rel')
	arrsize('$npc_thdick')
	arrsize('$npc_usedname')

	arrsize('npc_agil')
	arrsize('npc_apprnc')
	arrsize('npc_ass')
	arrsize('npc_bodyhair')
	arrsize('npc_breath')
	arrsize('npc_bust')
	arrsize('npc_cloc')
	arrsize('npc_clothpref')
	arrsize('npc_cyc')
	arrsize('npc_dance')
	arrsize('npc_danceero')
	arrsize('npc_def')
	arrsize('npc_dick')
	arrsize('npc_dnc')
	arrsize('npc_dob')
	arrsize('npc_dom')
	arrsize('npc_drunk')
	arrsize('npc_dye')
	arrsize('npc_erodnc')
	arrsize('npc_eyecol')
	arrsize('npc_eyesize')
	arrsize('npc_fat')
	arrsize('npc_fert')
	arrsize('npc_gender')
	arrsize('npc_genwart')
	arrsize('npc_glasses')
	arrsize('npc_Godrep')
	arrsize('npc_gon')
	arrsize('npc_grades')
	arrsize('npc_hairbsh')
	arrsize('npc_haircol')
	arrsize('npc_haircurl')
	arrsize('npc_hairlng')
	arrsize('npc_herpes')
	arrsize('npc_hgt')
	arrsize('npc_hipcurv')
	arrsize('npc_Hiv')
	arrsize('npc_horny')
	arrsize('npc_hymen')
	arrsize('npc_chem')
	arrsize('npc_chess')
	arrsize('npc_chlam')
	arrsize('npc_intel')
	arrsize('npc_jab')
	arrsize('npc_job')
	arrsize('npc_kick')
	arrsize('npc_lashes')
	arrsize('npc_lip')
	arrsize('npc_lipbalm')
	arrsize('npc_love')
	arrsize('npc_magik')
	arrsize('npc_makeup')
	arrsize('npc_malen')
	arrsize('npc_nerd')
	arrsize('npc_nips')
	arrsize('npc_pantys')
	arrsize('npc_Pavrep')
	arrsize('npc_pubes')
	arrsize('npc_punch')
	arrsize('npc_QW')
	arrsize('npc_rel')
	arrsize('npc_run')
	arrsize('npc_serving')
	arrsize('npc_sewing')
	arrsize('npc_sex')
	arrsize('npc_sexskill')
	arrsize('npc_shoot')
	arrsize('npc_skin')
	arrsize('npc_spermpot')
	arrsize('npc_sprt')
	arrsize('npc_stren')
	arrsize('npc_sub')
	arrsize('npc_sweat')
	arrsize('npc_syth')
	arrsize('npc_tan')
	arrsize('npc_teach')
	arrsize('npc_thrush')
	arrsize('npc_vag')
	arrsize('npc_vball')
	arrsize('npc_vital')
	arrsize('npc_vokal')
end

if $ARGS[0] = 'replace header':
	wait(ARGS[1])
	RH_Count = ARGS[2]
	$RH_temp = $MAINTXT
:RH_label
	RH_temp_lenght = LEN($RH_temp)
	RH_temp_LFpos = STRPOS($RH_temp,'\n')
	$RH_temp = $MID($RH_temp, RH_temp_LFpos+1, RH_temp_lenght - RH_temp_LFpos)
	RH_Count -=1
	if RH_Count > 0: jump 'RH_label'
	*clr
	$ARGS[3] & $ARGS[4] & $ARGS[5] & $ARGS[6] & $ARGS[7]
	$RH_temp
	killvar '$RH_temp'
	killvar 'RH_Count'
	killvar 'RH_temp_lenght'
	killvar 'RH_temp_LFpos'
end

if $ARGS[0]='img msg':
	$shortgstemp = '<center><img height=280 src="<<$ARGS[1]>>"></center>'
	msg $shortgstemp
	killvar '$shortgstemp'
end

!! Used for dividing with accurate rounding up/down
if $ARGS[0] = 'round_divide':
	!! ARGS[1] = value you want divided
	!! ARGS[2] = divider
	!!  func('shortgs','round_divide', number, divider)
	!!  func('shortgs','round_divide', 12345, 7)
	if ARGS[2] ! 0:
		temp_number = ARGS[1]/ARGS[2]
		if (ARGS[2] mod 2 ! 0 and ARGS[1] mod ARGS[2] > ARGS[2]/2) or (ARGS[2] mod 2 = 0 and ARGS[1] mod ARGS[2] >= ARGS[2]/2): temp_number += 1
		result = temp_number
		killvar 'temp_number'
	else
		msg '<b>Error: No dividing by 0! You trying to make the universe disappear?</b>'
	end
end

!! Used for rounding numbers to the nearest multiple of ARGS[2]
if $ARGS[0] = 'round_tool':
	!! ARGS[1] = value you want rounded
	!! ARGS[2] = nearest multiple to round to
	!!  func('shortgs','round_tool', number, multiple)
	!!  func('shortgs','round_tool', 12345, 10)
	if ARGS[2] ! 0:
		temp_multiple = ARGS[2]
		result = func('shortgs','round_divide', ARGS[1], ARGS[2]) * temp_multiple
		killvar 'temp_multiple'
	else
		msg '<b>Error: Can''t round to 0!</b>'
	end
end

!! Randomly picks one of the items plugged in
!!
!!  Option 1: (has 6 input limit)
!!  $ARGS[1] =		'string' or 'number' to specify what youre plugging in (can also be blank for numbers)
!!  $ARGS[2-7] =	 strings or numbers to pick from, limited to 6
!!  Example 1: func('shortgs', 'rand_pick', 'string', 'alpha', 'beta', 'gamma', 'delta', 'epsilon', 'zeta')
!!  Example 2: func('shortgs', 'rand_pick', '', 2, 3, 5, 7, 11, 13)
!!
!!  Option 2: (no limitations, has to be delimited)
!! 	$ARGS[1] =		'delimit'  -  used for larger numbers of items to pick from
!!  $ARGS[2] =		'string' or 'number' to specify what youre plugging in (can also be blank for numbers)
!!  $ARGS[3] =		 Delimited string to parse
!!  $ARGS[4] =		 Delimiter used (Default = '|' pipe)
!!  Example 1: func('shortgs', 'rand_pick', 'delimit', 'string', 'alpha|beta|gamma|delta|epsilon|zeta')
!!  Example 2: func('shortgs', 'rand_pick', 'delimit', 'number', '1-12-123-1234-12345-123456', '-')
!!  Example 3: func('shortgs', 'rand_pick', 'delimit', '', '0.1.2.3.5.7.11', '.')
if $ARGS[0] = 'rand_pick':
	if $ARGS[1] = 'delimit':
		if $ARGS[2] = 'string':
			gs 'shortgs', 'parse_string', '$rand_pick_temp', $ARGS[3], $ARGS[4]
			$result = $rand_pick_temp[rand(0, arrsize('$rand_pick_temp')-1)]
			killvar '$rand_pick_temp'
		else
			gs 'shortgs', 'parse_string', 'rand_pick_temp', $ARGS[3], $ARGS[4]
			result = rand_pick_temp[rand(0, arrsize('rand_pick_temp')-1)]
			killvar 'rand_pick_temp'
		end
	else
		if arrsize('ARGS') > 2:
			if $ARGS[1] = 'string':
				$result = $ARGS[rand(2, arrsize('$ARGS')-1)]
			else
				result = ARGS[rand(2, arrsize('ARGS')-1)]
			end
		else
			msg '<b>Error: ''rand_pick'' is missing ARGS</b>'
		end
	end
end

!! Parse delimited string into an array
!!	$ARGS[1] =		ArrayName (has to include $ for string values)
!!	$ARGS[2] =		Delimited string to parse
!!	$ARGS[3] =		Delimiter used (Default = '|' pipe)
!!  Example 1: gs 'shortgs', 'parse_string', '$my_array', 'alpha|beta|gamma|delta|epsilon|zeta'
!!  Example 2: gs 'shortgs', 'parse_string', 'my_array', '1-12-123-1234-12345-123456', '-'
if $ARGS[0] = 'parse_string':
	!! Some failsafes (blank array name, blank string or no delimiters in string)
	if $ARGS[1] ! '':
		if $ARGS[2] ! '' and instr($ARGS[2],iif($ARGS[3] = '', '|', $ARGS[3])) > 0:
			!! Set delimiter with default if needed
			if $ARGS[3] = '':
				$ParserTmpDelim = '|'
			else
				$ParserTmpDelim = $ARGS[3]
			end
			!! Clear temp array if needed
			killvar 'ParserTmpArr' & killvar '$ParserTmpArr'
			$ParserTmpStr = $ARGS[2]
			!! Loop through string until no more delimiters found
			:StringParser01
			ParserTmpIdx = instr($ParserTmpStr, $ParserTmpDelim)
			if ParserTmpIdx > 0:
				if mid($ARGS[1],1,1) = '$':
					$ParserTmpArr[] = mid($ParserTmpStr, 1, ParserTmpIdx-1)
					$ParserTmpStr = mid($ParserTmpStr, ParserTmpIdx+1)
				else
					ParserTmpArr[] = mid($ParserTmpStr, 1, ParserTmpIdx-1)
					$ParserTmpStr = mid($ParserTmpStr, ParserTmpIdx+1)
				end
				jump 'StringParser01'
			!! Get last part since no more delimiters were found and copy to the final array
			elseif mid($ARGS[1],1,1) = '$':
				$ParserTmpArr[] = $ParserTmpStr
				copyarr $ARGS[1], '$ParserTmpArr'
			else
				ParserTmpArr[] = $ParserTmpStr
				copyarr $ARGS[1], 'ParserTmpArr'
			end
			killvar '$ParserTmpDelim'
			killvar '$ParserTmpStr'
			killvar 'ParserTmpIdx'
			killvar 'ParserTmpArr' & killvar '$ParserTmpArr'
		else
			msg '<b>Error: No delimited string found!</b>'
		end
	else
		msg '<b>Error: No array name found!</b>'
	end
end

--- shortgs ---------------------------------