# lact_lib

if $ARGS[0] = '$get_bfat_tissue':
	!! func('lact_lib', 'get_bfattissue', npc_nbsize, npc_lactatemm)
	!! function to get breast fat tissue amount. Can be used for NPC as well as PC.
	!! ARGS[1] = npc_nbsize - the natural bust size of the NPC/PC.
	!! ARGS[2] = npc_lactatemm - he lactatemm of the NPC/PC.
	!! RESULT = Fat amount in ccm * 10.
	!! function for cup size volume in ccm y = 0,0002023*x^3 + 0,029199*x^2 + 4,3791*x + 70
	!! x = ((ARGS[1]/5) + 1)*10
	!! this function is based on the x figures for pcs_bust size (moving in steps of 5) and the actual cup sizes from a wikipedia table, which can be found here: https://en.wikipedia.org/wiki/Bra_size
	!! The function was estimated with excel using a trend line estimation for polynoms of third grade and a y = 0 at 70ccm
	!! https://www.ncbi.nlm.nih.gov/pubmed/11936199
	!! The percentage of fat volume in the total breast volume varied from 7 to 56% and the percentage of fat weight in the total breast weight varied from 3.6 to 37.6%. This great variability in the respective proportions of fat and glands in the evaluated specimens was not significantly correlated to age and body mass index.
	if ARGS[1] > 0:
		temp_var = ((ARGS[1]/5) + 1)*10
		temp_var2 = (((2023*temp_var*temp_var*temp_var)/10000000)+((29199*temp_var*temp_var)/1000000)+((43791*temp_var)/10000)+70)*10
		if temp_var2 > ARGS[2]:
			RESULT = temp_var2 - (ARGS[2] + ARGS[2]/50)
		elseif temp_var2 = ARGS[2]:
			RESULT = 0
		else
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$get_bfat_tissue</i>!</font> - Node ARGS[1] - more mammary gland tissue available then total breast tissue.</b>'
		end
	else
		if ARGS[2] > 700:
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$get_bfat_tissue</i>!</font> - Node ARGS[2] - more mammary gland tissue available then total breast tissue.</b>'
		else
			RESULT = 700
		end
	end
end

if $ARGS[0] = '$calc_npc_lactatemm_0':
	!! func('lact_lib', 'calc_npc_lactatemm_0', npc_glandamount, npc_prodstate, npc_breastage, npc_breastcount)
	!! New calc lactatemm function usuable for NPCs. Test function number one.
	!! ARGS[1] = npc_glandamount - The glandamount of the npc per breast. Glandamount here is actually the alveoli amount per breast. The value is 4500 to 150000 per breast depending on the genetics or if the npc went through pregnancy already.
	!! ARGS[2] = npc_prodstate - The breast production state of the npc. State can be "none", "induced" or "natural".
	!! ARGS[3] = npc_breastage - State can be "virgin" or "mature". Virgin in this case means that the breasts did not go through pregnancy changes yet, while mature is a fully developed breast that had all the changes during pregnancy.
	!! To determine the breastage, just check if the NPC has gone through pregnancy or not.
	!! ARGS[4] = npc_breastcount - The breast count of the NPC. If 0 the result will always be 0. Could be used for amputation events or multiple breasts events.
	!! The function will return something even if there is no lactation currently happening. this could be used for special events where sudden lactation is induced with the help of drugs. For example a lactation pill that will cause the NPC to lactate immediately without classical induction or natural growth during pregnancy.
	!! RESULT = lactatemm in ml*10

	if ARGS[2] = 'none':
		if ARGS[3] = 'virgin':
			temp_var = 2
		elseif ARGS[3] = 'mature':
			temp_var = 2
		else
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_npc_lactatemm_0</i>!</font> - Node ARGS[2] "none".</b>'
		end
	elseif ARGS[2] = 'induced':
		if ARGS[3] = 'virgin':
			temp_var = 20
		elseif ARGS[3] = 'mature':
			temp_var = 80
		else
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_npc_lactatemm_0</i>!</font> - Node ARGS[2] "induced".</b>'
		end
	elseif ARGS[2] = 'natural':
		if ARGS[3] = 'virgin':
			temp_var = 20
		elseif ARGS[3] = 'mature':
			temp_var = 80
		else
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_npc_lactatemm_0</i>!</font> - Node ARGS[2] "natural".</b>'
		end
	else
		cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_npc_lactatemm_0</i>!</font> - Root Node ARGS[2].</b>'
	end

	if ARGS[1] <= 0:
		RESULT = 0
	else
		RESULT = (ARGS[1]*temp_var*ARGS[4])/1000
	end
end

if $ARGS[0] = '$calc_lactatemm':

	!! func('lact_lib', 'calc_lactatemm')
	!! No arguments at the moment. Information is taken from the global variables 'nbsize', 'lactate','lactateinduced','kid'.
	!! lactatemm should be calculated every day, so if the breasts size is changed naturally the lactatemm will get higher. No change when silicone tits happen. Only natural breast tissue should make milk.
	!! Usage: lactatemm = func('lact_lib','$calc_lactatemm')
	!! RESULT = lactatemm in ml*10

	if lactate = 0:
		RESULT = 0
	elseif lactate >0:
		temp_breastsize = 0
		temp_breastsize += nbsize
		temp_var = 0
		!! This if needs to be changed later. If the kid is lost during the pregnancy, Sveta may still went through full breast development. If changing something here, please contact milky_boobs in the forums.
		if kid <= 0:
			temp_var = ((8*temp_breastsize*temp_breastsize)+(37*temp_breastsize))/4
			RESULT = temp_var
		else
			RESULT = ((8*temp_breastsize*temp_breastsize)+(37*temp_breastsize))
		end
	else
		cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_lactatemm</i>!</font></b>'
	end
end

if $ARGS[0] = '$get_breastmilk_time':
	!!	func('lact_lib','$get_breastmilk_time', sucktion_type, milk_demand)
	!!	ARGS[1] = sucktion_type: the type of sucktion. adult_mouth [0], child_mouth [1], baby_mouth [2], manual_breastpump [3] , electric_breastpump [4], hand_expressing [5], cow milker [6], weak baby_mouth [7]
	!!	ARGS[2] = milk_demand: how much milk is demanded. Warning: Should be ml and not in ml*10 for ease of use. :D
	!!	RESULT = Time in Minutes
	!!	Usage: breastmilktimetoget = func('lact_lib','$get_breastmilk_time', 2, 150)
	!!	This function is just calculating the amount of time needed to get a specific amount of milk from svetas breasts. It is not pumping milk from her or changes anything else.
	!!	If you want to milk sveta, use get_breastmilk.
	if lactate > 0:
		!! 'suck_flow_rate initialized' Base Rate of sucking is 10ml/minute.
		if ARGS[1] = 0:
			!!	'adult sucking'
			suck_flow_rate = 120
		elseif ARGS[1] = 1:
			!!	'child sucking'
			suck_flow_rate = 110
		elseif ARGS[1] = 2:
			!!	'baby sucking'
			suck_flow_rate = 80
		elseif ARGS[1] = 3:
			!!	'manual_breastpump sucking'
			suck_flow_rate = 180
		elseif ARGS[1] = 4:
			!!	'electric_breastpump sucking'
			suck_flow_rate = 400
		elseif ARGS[1] = 5:
			!!	'hand expression'
			suck_flow_rate = 105
		elseif ARGS[1] = 6:
			!!	'cow milker sucking'
			suck_flow_rate = 1000
		elseif ARGS[1] = 7:
			!!	'weak baby sucking'
			suck_flow_rate = 50
			temp_var = pcs_mood + ARGS[2]
			if temp_var > 100:
				pcs_mood = 100
			else
				pcs_mood += ARGS[2]
			end
		else
			!!	'suck flow else branch'
			suck_flow_rate = 100
		end

		if pcs_nips > 0:
			max_nip_flow_rate = 60
		elseif pcs_nips > 20:
			max_nip_flow_rate = 80
		elseif pcs_nips > 40:
			max_nip_flow_rate = 100
		elseif pcs_nips > 60:
			max_nip_flow_rate = 120
		elseif pcs_nips > 80:
			max_nip_flow_rate = 140
		elseif pcs_nips > 100:
			max_nip_flow_rate = 160
		else
			max_nip_flow_rate = 100
		end

		if breastcounter > 0:
			temp_var = breastcounter/10
			soreness_mod += temp_var
			if soreness_mod > 20: soreness_mod = 20
			if nipple_cream = 1:
				soreness_mod += 20
				nipple_cream = 0
			end
		end

		nip_flow_mod = 1
		temp_var = breastcounter/10
		nip_flow_mod += temp_var
		if nip_flow > 30: nip_flow_mod = 30
		max_nip_flow_rate += nip_flow_mod

		if (lactaterate/60) < 1 and lactaterate > 0:
			temp_lactaterate = 1
		else
			temp_lactaterate = lactaterate/60
		end

		if lactatemv >= (ARGS[2]*10):
			if max_nip_flow_rate <= suck_flow_rate:
				temp_var = (ARGS[2]*10)/max_nip_flow_rate
			else
				temp_var = (ARGS[2]*10)/suck_flow_rate
			end
			RESULT = temp_var
		elseif lactatemv > 0 and lactatemv < (ARGS[2]*10):
			if max_nip_flow_rate <= suck_flow_rate:
				temp_var = lactatemv/max_nip_flow_rate
				temp_var2 = (ARGS[2]*10) - lactatemv
				if max_nip_flow_rate <= temp_lactaterate:
					temp_var += temp_var2/max_nip_flow_rate
				else
					temp_var += temp_var2/(temp_lactaterate*10)
				end
			else
				temp_var = lactatemv/suck_flow_rate
				temp_var2 = (ARGS[2]*10) - lactatemv
				if suck_flow_rate <= temp_lactaterate:
					temp_var += temp_var2/suck_flow_rate
				else
					temp_var += temp_var2/(temp_lactaterate*10)
				end
			end
			RESULT = temp_var
		elseif lactatemv <=0:
			if max_nip_flow_rate <= suck_flow_rate:
				if max_nip_flow_rate <= temp_lactaterate:
					temp_var = (ARGS[2]*10)/max_nip_flow_rate
				else
					temp_var = (ARGS[2]*10)/(temp_lactaterate*10)
				end
			else
				if suck_flow_rate <= temp_lactaterate:
					temp_var = (ARGS[2]*10)/suck_flow_rate
				else
					temp_var = (ARGS[2]*10)/(temp_lactaterate*10)
				end
			end
			RESULT = temp_var
		else
			RESULT = 0
		end
	else
		RESULT = 0
	end
end

if $ARGS[0] = '$get_breastmilk':
	!!	func('lact_lib','$get_breastmilk', sucktion_type, sucktion_time)
	!!	ARGS[1] = sucktion_type: the type of sucktion. adult_mouth [0], child_mouth [1], baby_mouth [2], manual_breastpump [3] , electric_breastpump [4], hand_expressing [5], cow milker [6], weak baby_mouth [7]
	!!	ARGS[2] = sucktion_time: how many minutes the sucking/pumping takes place
	!!	Usage: breastmilkvolume = func('lact_lib','$get_breastmilk', 4, 20)
	!! 	RESULT = Milk in ml*10
	!!	Sveta, someone or something tries to milk Svetas breasts, so the daily variable breastpumped is switched on. This is used for the femcycle. If this is not switched on, possible changes like prolactinlvl etc go down.
	breastpumped = 1
	if soreness_mod <= 0: soreness_mod = 1
	!!	what type of sucktion is happening? different sucktion can cause a different demand of breastmilk. Base rate of sucktion is 10ml/minute x 10. So if the sucktion rate is 10ml/min then suck_flow_rate = 100.
	if ARGS[1] = 0:
		!!	'adult sucking'
		suck_flow_rate = 120
		temp_var = pcs_mood +(ARGS[2]/8)
		if temp_var > 100:
			pcs_mood = 100
		else
			pcs_mood += ARGS[2]/8
		end
	elseif ARGS[1] = 1:
		!!	'child sucking'
		suck_flow_rate = 110
		temp_var = pcs_mood + (ARGS[2]/2)
		if temp_var > 100:
			pcs_mood = 100
		else
			pcs_mood += ARGS[2]/2
		end
	elseif ARGS[1] = 2:
		!!	'baby sucking'
		suck_flow_rate = 80
		temp_var = pcs_mood + ARGS[2]
		if temp_var > 100:
			pcs_mood = 100
		else
			pcs_mood += ARGS[2]
		end
	elseif ARGS[1] = 3:
		!!	'manual_breastpump sucking'
		suck_flow_rate = 180
	elseif ARGS[1] = 4:
		!!	'electric_breastpump sucking'
		suck_flow_rate = 400
	elseif ARGS[1] = 5:
		!!	'hand expression'
		suck_flow_rate = 105
	elseif ARGS[1] = 6:
		!!	'cow milker sucking'
		suck_flow_rate = 1000
	elseif ARGS[1] = 7:
		!!	'weak baby sucking'
		suck_flow_rate = 50
		temp_var = pcs_mood + ARGS[2]
		if temp_var > 100:
			pcs_mood = 100
		else
			pcs_mood += ARGS[2]
		end
	else
		!!	'suck flow else branch'
		suck_flow_rate = 100
	end
	!!	If you pump and work your breast more, soreness will decrease after pumping. This can also decline if your breasts arent worked for a longer time.
	if breastcounter > 0:
		temp_var = breastcounter/10
		soreness_mod += temp_var
		if soreness_mod > 30: soreness_mod = 30
		if nipple_cream = 1:
			soreness_mod += 20
			nipple_cream = 0
		end
	end
	!!	If Sveta is not lactating we still need to do some actions. This is handled in here. Nipple pain + breast pain are applied as well as stamina is used.
	if lactate <= 0:
		if milkoverdemand <= 0: milkoverdemand = 0
		pump_stop_brake = 0
		!!	This is how much milk demand is applied to the breasts. In this function it is needed to calculate the nipple pain and breast pain.
		max_sucktion_demand = suck_flow_rate*ARGS[2]
		if pain['nipples'] <= 60:
			suck_until_pain = (((60 - pain['nipples'])*soreness_mod)*10)/(suck_flow_rate/18)
		end
		temp_var = pain['nipples'] + max_sucktion_demand/(soreness_mod*100)
		if temp_var > 60:
			pain['nipples'] = 65
			pump_stop_brake = 1
			pumptime = suck_until_pain
			max_sucktion_demand = suck_flow_rate*pumptime
		else
			pain['nipples'] += max_sucktion_demand/(soreness_mod*100)
		end
		temp_var = pain['breasts'] + max_sucktion_demand/10000
		if temp_var > 20:
			pain['breasts'] = 25
		else
			pain['breasts'] += max_sucktion_demand/10000
		end
		!!	Pumping breasts is exhausting even if no milk comes. Pumping will impact the stamina of Sveta if she is not lactating.
		temp_var = pcs_stam - max_sucktion_demand/300
		if temp_var < 0:
			pcs_stam = 0
			!!	energy usage flag on.
			energytomilkpump = 1
			pcs_sweat += max_sucktion_demand/1000
		else
			pcs_stam -= max_sucktion_demand/300
			pcs_sweat += max_sucktion_demand/1000
			!!	energy usage flag on.
			energytomilkpump = 1
		end
		if pumptime < 10:
			breastcounter += 1
		else
			breastcounter += pumptime/10
		end
		milkoverdemand += max_sucktion_demand
		RESULT = 0
	elseif lactate > 0:
		!!	How much milk can go through the nipple. Base rate is 10ml/minute (100) when sucktion is applied to the nipple. If the demand is higher than the nipple can push through, nipple soreness will happen more quickly.
		if pcs_nips > 0:
			max_nip_flow_rate = 60
		elseif pcs_nips > 20:
			max_nip_flow_rate = 80
		elseif pcs_nips > 40:
			max_nip_flow_rate = 100
		elseif pcs_nips > 60:
			max_nip_flow_rate = 120
		elseif pcs_nips > 80:
			max_nip_flow_rate = 140
		elseif pcs_nips > 100:
			max_nip_flow_rate = 160
		else
			max_nip_flow_rate = 100
		end
		!!	If you pump more, more milk will be able to flow out, disregarding nipplesize. Svetas nipples will get used to have milk stream through them, grows and drops with the breastcounter.
		nip_flow_mod = 1
		nip_flow_mod += breastcounter
		if nip_flow > 400: nip_flow_mod = 400
		max_nip_flow_rate += nip_flow_mod
		!!	How much milk demand is applied to the breasts.
		max_sucktion_demand = suck_flow_rate*ARGS[2]
		!!	We want to know if we can just suck out what is already stored or if additional milk production is needed to go through the whole pumping/sucking.
		!!	If we only need 20ml from a 100ml storage, we would only substract 20ml, leaving 80ml inside the breasts.
		!!	Also lets make sure we start at zero from the stuff we get from Sveta.
		milkedvolume = 0
		!!	Case: Enough milk in Svetas breasts, covering the demand
		if lactatemv >= max_sucktion_demand:
			!!	Checking if svetas nipple flow is enough to serve the demand. If yes - get the demand; If no - get what she is able to give us.
			if max_nip_flow_rate >= suck_flow_rate:
				milkedvolume = max_sucktion_demand
				lactatemv -= max_sucktion_demand
			else:
				milkedvolume = max_nip_flow_rate*ARGS[2]
				lactatemv -= milkedvolume
			end
		!!	Case: Not enough milk in Svetas breasts.
		elseif lactatemv < max_sucktion_demand:
			!!	We have two sub cases in this one. Sveta has no lactatemv and Sveta has not enough lactatemv. This means she has to produce more milk, but first we need to know how much is needed.
			!!	temp_var will be the amount of milk Sveta has to produce to serve the demand. pump time left is the time left after lactatemv is drained.
			if lactatemv <= 0:
				temp_var = max_sucktion_demand
				pumptime_left = ARGS[2]
			else
				temp_var = max_sucktion_demand - lactatemv
				if max_nip_flow_rate >= suck_flow_rate:
					pumptime_left = ARGS[2] - (lactatemv/suck_flow_rate)
				else
					pumptime_left = ARGS[2] - (lactatemv/max_nip_flow_rate)
				end
				if pumptime_left < 0: pumptime_left = 0
			end
			!!	Now we know how much time we have and how much demand we have. Time to check if Sveta can do it.
			!!	For the case, that svetas milk flow is not big enough pumptime left will be 0, therefore this is handled here.
			if pumptime_left >0:
				if max_nip_flow_rate >= suck_flow_rate:
					!!	the lactaterate is per hour, so it is possible that lactaterate will end up being zero when devided by 60. therefore everything here is multiplied by 100.
					if (suck_flow_rate*100) <= ((lactaterate*100)/60):
						milkedvolume += suck_flow_rate*pumptime_left
					else
						milkedvolume += ((((lactaterate*100)/60)*pumptime_left)/100)
						breastcounter += 2
					end
				else
					!!	Same here as above.
					if (max_nip_flow_rate*100) <= ((lactaterate*100)/60):
						milkedvolume += max_nip_flow_rate*pumptime_left
						breastcounter += 2
					else
						milkedvolume += ((((lactaterate*100)/60)*pumptime_left)/100)
						breastcounter += 2
					end
				end
				!!	Produced milk needs to be subtracted from the hourly lactate rate, so femcycle is only adding the milk that was not produced yet in the next hour
				if pumptime_left > 60:
					if ((pumptime_left*100)/60) > 100:
						lactaterate_use -= ((((lactaterate*100)/60)*(pumptime_left mod 60))/100)
					else
						lactaterate_use = lactaterate
					end
				else
					if lactaterate >= lactaterate_use:
						lactaterate_use -= milkedvolume
					else
						lactaterate_use = lactaterate
					end
				end
				if lactaterate_use <= 0: lactaterate_use = 0
				!!	Sveta had to make milk, so she needs to use some of her body resources to make the milk.
				if milkedvolume > 0:
					!!	energy usage flag on. Can be used in events to show that sveta is getting hungry or thirsty
					energytomilkpump = 1
					pcs_stam -= max_sucktion_demand/300
					if pcs_stam <= 0: pcs_stam = 0
					pcs_sweat += max_sucktion_demand/1000
					pcs_hydra -= milkedvolume/120
					if pcs_hydra < 1: pcs_hydra = 1
					pcs_energy -= milkedvolume/1200
				end
			end
			!!	Now we check if sveta was able to make it or not. If not we have milk overdemand which will be used in femcycle to make her produce more milk next day.
			if temp_var > milkedvolume:
				milkoverdemand += (temp_var - milkedvolume)
			end
			!!	time to add the pumped lactatemv to the milkedvolume and empty lactatemv.
			milkedvolume += lactatemv
			lactatemv = 0
			!!	Here we have nipple and breastpain. The idea is - if there is more sucktion than the nipples can take more pain is applied. If the breasts make less milk then demanded pain to the breasts is applied.
			!!	Else - there will only be nipple pain.
			if max_nip_flow_rate < suck_flow_rate:
				temp_var = pain['nipples'] + ((suck_flow_rate - max_nip_flow_rate)*100*ARGS[2])/2000 - (soreness_mod*ARGS[2])*15
				if temp_var >= 60:
					pain['nipples'] = 65
				elseif temp_var <= 0:
					pain['nipples'] += 1
				else
					pain['nipples'] += (((suck_flow_rate - max_nip_flow_rate)*100*ARGS[2])/2000 - (soreness_mod*ARGS[2])*15)
				end
			else
				if ARGS[2] < 10:
					pain['nipples'] += 1
				elseif ARGS[2] >= 10 and soreness_mod > ARGS[2]:
					pain['nipples'] += 1
				else
					pain['nipples'] += (ARGS[2]/10 - soreness_mod/10)
				end
			end
			if max_nip_flow_rate >= suck_flow_rate:
				if (suck_flow_rate*100) > ((lactaterate*100)/60):
					temp_var = pain['breasts'] + (((suck_flow_rate*100)-((lactaterate*100)/60))*pumptime_left)/1000
					if temp_var > 20:
						pain['breasts'] = 20
					else
						pain['breasts'] += (((suck_flow_rate*100)-((lactaterate*100)/60))*pumptime_left)/1000
					end
				end
			else
				if (max_nip_flow_rate*100) > ((lactaterate*100)/60):
					temp_var = pain['breasts'] + (((max_nip_flow_rate*100)-((lactaterate*100)/60))*pumptime_left)/1000
					if temp_var > 20:
						pain['breasts'] = 20
					else
						pain['breasts'] += (((max_nip_flow_rate*100)-((lactaterate*100)/60))*pumptime_left)/1000
					end
				end
			end
		end
		if pumptime < 10:
			breastcounter += 1
		else
			breastcounter += pumptime/10
		end
		!!	Done - Result is the milked volume.
		RESULT = milkedvolume
	end
end

!!	bp_milking - breast pump milking
!!	use href="exec:gt ''lact_lib'',''bp_milking''"

if $ARGS[0] = 'bp_milking':
	pumptime = 0
	pumptype = 0
	if pump_bottletype < 1500: pump_bottletype = 1500
	if bpbottles <= 0: bpbottles = 1
	if $location_type ! 'bathroom' and pcs_inhib < 40:
		'You can''t use it here.'
			act 'Finish': menu_off = 0 & gt $loc, $metka
	elseif bp_unbox <= 0:
		'You need to unbox your breast pump first.'
			act 'Finish': menu_off = 0 & gt $loc, $metka
	elseif bp_unbox = 1 and ($location_type = 'bathroom' or $location_type = 'private'):
		gt 'lact_lib', 'bp_unbox_event'
	else
		*clr
		cla
		'<center><img <<$set_imgh>> src="images/pc/body/tits/breast_pump.jpg"></center>'
		'How long do you want to pump your breasts with the manual breast pump?'
		if bpbottlem > 0:
			if pump_bottletype = 1500:
				'Current bottle size in use: &gt;150ml | <a href="exec:pump_bottletype = 2500 & gt ''lact_lib'', ''bp_milking''">250ml</a>'
			else
				'Current bottle size in use <a href="exec:pump_bottletype = 1500 & gt ''lact_lib'', ''bp_milking''">150ml</a> | &gt;250ml'
			end
		end
		if lactatemv > 0:
			pumptime = (func('lact_lib','$get_breastmilk_time', 3, (lactatemv/10)))
			if pumptime > 5:
				pumptime -= 2
			end
			if pumptime > 60:
				act 'Pump until breasts are empty':
					*clr
					cla
					minut += 2
					'As you prepare for pumping you weight your breasts in your hands. You feel that your breasts carry a large amount of milk and pumping will probably take a long time.'
					'Getting relieve for your breasts with the manual breast pump will probably take at least <<pumptime>> minutes.'
					if pcs_know_mward <= 0:
						'You concider visiting a hospital to get help or buying a better breastpump.'
						pcs_ask_mward_help = 1
						pcs_knows_electric_pump = 1
					end
					'Do you want to continue?'
					act 'Don''t pump':gt $loc, $metka
					act 'Continue':
						gt 'lact_lib', 'milking'
					end
				end
			elseif pumptime <= 0:
				act 'Pump until breasts are empty':
					*clr
					cla
					minute += 2
					'As you prepare for pumping you weight your breasts in your hands. Your breasts feel really empty. There is no need to pump now.'
					act 'Don''t pump':gt $loc, $metka
					act 'back':gt 'lact_lib', 'bp_milking'
				end
			else
				act 'Pump until breasts are empty':
					pumptime = func('lact_lib','$get_breastmilk_time', 3, (lactatemv/10))
					if pumptime > 5:
						pumptime -= 2
					end
					gt 'lact_lib', 'milking'
				end
			end
		end
		act '15 Minutes':
			pumptime = 15
			gt 'lact_lib', 'milking'
		end
		act '30 Minutes':
			pumptime = 30
			gt 'lact_lib', 'milking'
		end
		act 'Custom':
			pumptime = input ("How long do you plan to pump your breasts? (Not more than 60 minutes)")
			if pumptime <= 0 or pumptime > 60:
				minut += 2
				act 'Don''t pump':menu_off = 0 & gt $loc, $metka
				act 'back':gt 'lact_lib', 'bp_milking'
			elseif pumptime > 0 and pumptime <= 60:
				gt 'lact_lib', 'milking'
			end
		end
		act 'Massage your breasts':	gt 'lact_lib','man_milking'
		act 'Don''t pump':menu_off = 0 & gt $loc, $metka
	end
end

!!	man_milking - manual (with hands) milking
!!	use href="exec:gt ''lact_lib'',''man_milking''"
!!	for manual milk expression in bathrooms etc. please use this function.

if $ARGS[0] = 'massage':
	if breastcounter <= 0:
		temp_var = 50
	else
		temp_var = (50/breastcounter)
	end
	if breastpump = 0 and pcs_horny >= temp_var and pcs_inhib >= 40:
		act 'Massage your breasts': gt 'lact_lib','man_milking'
	end
end

if $ARGS[0] = 'man_milking':
	pumptime = 0
	if pcs_inhib < 40:
		*clr
		cla
		'You can''t do this here.'
			act 'Finish':menu_off = 0 & gt $loc, $metka
	else
		*clr
		cla
		'How long do you want to massage your breasts?'
		if lactatemv > 0:
			pumptime = (func('lact_lib','$get_breastmilk_time', 5, (lactatemv/10)))
			if pumptime > 60:
				act 'Express until breasts are empty':
					*clr
					cla
					minut += 2
					'You prepare yourself and weight your breasts in your hands. You feel that your breasts carry a large amount of milk and manually expressing it will probably take a long time.'
					'Getting relieve for your breasts with manual expression will probably take at least <<pumptime>> minutes.'
					if breastpump <= 0 and bp_unbox <= 1:
						'You should concider buying a breastpump'
					elseif breastpump = 1 and bp_unbox <= 1 and pain['nipples'] <= 60:
						'You should concider using your breastpump.'
					else
						'You should concider the use of a breastpump.'
					end
					'Do you want to continue?'
					act 'Don''t express':menu_off = 0 & gt $loc, $metka
					act 'Express your milk':
						gt 'lact_lib', 'hand_milking'
					end
				end
			elseif pumptime <= 0:
				act 'Express milk until breasts are empty':
					*clr
					cla
					minute += 2
					'As you prepare yourself you feel your breasts in your hands. Your breasts feel really empty. There is no need to express now.'
					act 'Don''t express milk':menu_off = 0 & gt $loc, $metka
					act 'back':gt 'lact_lib', 'man_milking'
				end
			else
				act 'Express until breasts are empty':
					pumptime = func('lact_lib','$get_breastmilk_time', 5, (lactatemv/10))
					gt 'lact_lib', 'hand_milking'
				end
			end
		end
		act '5 Minutes':
			pumptime = 5
			gt 'lact_lib', 'hand_milking'
		end
		act '10 Minutes':
			pumptime = 10
			gt 'lact_lib', 'hand_milking'
		end
		act 'Custom':
			pumptime = input ("How long do you plan to massage your breasts? (Not more than 60 minutes)")
			if pumptime <= 0 or pumptime > 60:
				minut += 2
				act 'Don''t express':gt $loc, $metka
				act 'back':gt 'lact_lib', 'man_milking'
			elseif pumptime > 0 and pumptime <= 60:
				gt 'lact_lib', 'hand_milking'
			end
		end
		act 'Don''t express':menu_off = 0 & gt $loc, $metka
	end
end

if $ARGS[0] = 'bp_unbox_event':
	if bp_unbox <= 0:
		*clr
		cla
		minut += 5
		if $location_type = 'bathroom':
			'You push down the toilet seat to sit down and slowly start to unbox your newly aquirred breast pump.'
		elseif $location_type = 'private' and $locclass = 'bedr':
			'You sit down on your bed and slowly start to unbox your newly aquirred breast pump.'
		elseif $location_type = 'private':
			'You sit down and slowly start to unbox your newly aquirred breast pump.'
		end
		if kid <= 0 and preg <= 0 and pregtimes <= 0 and pregchem <= 0 and bp_unbox <= 0:
			'While examining it, you think about why you bought it in the first place. You are not pregnant nor do you have a kid that needs breast milk.'
			if lactate <= 0:
				'Your breasts haven''t got any milk in them too, so it seems this pump is a bit useless.'
			else
				'At least it can help to get the milk out of your breasts.'
			end
		end
		if $location_type = 'private':
			'<center><img <<$set_imgh>> src="images/pc/body/tits/pump_unboxing.jpg"></center>'
		elseif $location_type = 'bathroom':
			'<center><img <<$set_imgh>> src="images/pc/body/tits/pump_unboxing_bath.jpg"></center>'
		else
			'<center><img <<$set_imgh>> src="images/pc/body/tits/pump_unboxing_bath.jpg"></center>'
		end
		if (pcs_inhib > 40 and $location_type = 'private') or $location_type = 'bathroom':
			act 'Try out how it works':
				*clr
				cla
				'You pull up your top to release your breasts'
				'<br><center><img <<$set_imgh>> src="images/pc/body/tits/t<<tits>>.jpg"></center><br>'
				'Your fingers glide around the sucktion cup of the breast pump, while your other hand holds the pump.'
				'Making sure that no one is around, you lift the breast pump to your left breast. The cold cone feels uncomfortable on your nipple.'
				milkedvolume = func('lact_lib','$get_breastmilk', 3, 1)
				minut += 1
				bp_unbox = 2
				if lactate > 0 and milkedvolume > 0:
					if milkedvolume <= 50:
						'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
						'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it. The pump starts to draw milk from your breast.'
						'You go on for a minute and then detach the pump. You collected some milk, but it is just a small puddle in the bottle.'
						'<br><center><img <<$set_imgh>> src="images/pc/body/tits/pump_milkdrops.jpg"></center>'
					elseif milkedvolume > 50 and milkedvolume <= 1500:
						'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
						'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it. The pump starts to draw milk from your breast.'
						'You go on for a minute and then detach the pump. You collected <<milkedvolume/10>>ml of your breastmilk.'
						'<br><center><img <<$set_imgh>> src="images/pc/body/tits/pump_half.jpg"></center>'
					else
						'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
						'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it. The pump starts to draw milk from your breast.'
						'You go on for a minute and then detach the pump. You easily filed the breast pump bottle with your breast milk just with this little pumping.'
						'<br><center><img <<$set_imgh>> src="images/pc/body/tits/pump_full.jpg"></center>'
					end
					'You nod at the breast pump, thinking it will come in handy.'
				elseif lactate > 0 and milkedvolume <= 0:
					'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
					'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it.'
					'You go on for a minute and then detach the pump. You collected some milk, but it is just a small puddle in the bottle.'
					'<br><center><img <<$set_imgh>> src="images/pc/body/tits/pump_milkdrops.jpg"></center>'
				else
					'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
					'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it.'
					'You go on for a minute and then detach the pump. As expected no milk was collected in the bottle.'
					'<br><center><img <<$set_imgh>> src="images/pc/body/tits/breast_pump.jpg"></center>'
				end
				act 'continue':
					*clr
					cla
					if milkedvolume > 50 and $location_type = 'private':
						'You look at the milk in the bottle and then around the room. Having no idea what to do with the excess milk, you look at it and suddenly sip it down.'
						'It is your milk, so it should be okay to drink it.'
						'<center><img <<$set_imgh>> src="images/pc/body/tits/milk_drink.jpg"></center>'
						'<center>The milk is still warm from your breasts.</center>'
						pcs_health += milkedvolume/400
						pcs_energy += milkedvolume/500
						if pcs_hydra >= 100:
							pcs_hydra += milkedvolume/200
						else
							pcs_hydra += milkedvolume/100
						end
						minut += ((milkedvolume/1000) + 3)
						act 'Finish': menu_off = 0 & gt $loc, $metka
					else
						'You clean up your pump and cover your breasts again.'
						act 'Finish': menu_off = 0 & gt $loc, $metka
					end
				end
				bp_unbox = 2
			end
		end
		act 'Don''t try it here':
			*clr
			cla
			'You look around you, not feeling to comfortable to use the breast pump here.'
			bp_unbox = 1
			act 'Finish': menu_off = 0 & gt $loc, $metka
		end
	elseif bp_unbox = 1:
		if $location_type = 'private' and pcs_inhib < 40:
			'You can''t do this here'
			act 'Finish': menu_off = 0 & gt $loc, $metka
		else
			'You pull up your top to release your breasts'
			'<br><center><img <<$set_imgh>> src="images/pc/body/tits/t<<tits>>.jpg"></center><br>'
			'Your fingers glide around the sucktion cup of the breast pump, while your other hand holds the pump.'
			'Making sure that no one is around, you lift the breast pump to your left breast. The cold cone feels uncomfortable on your nipple.'
			milkedvolume = func('lact_lib','$get_breastmilk', 3, 1)
			minut += 1
			bp_unbox = 2
			if lactate > 0 and milkedvolume > 0:
				if milkedvolume <= 50:
					'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
					'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it. The pump starts to draw milk from your breast.'
					'You go on for a minute and then detach the pump. You collected some milk, but it is just a small puddle in the bottle.'
					'<br><center><img <<$set_imgh>> src="images/pc/body/tits/pump_milkdrops.jpg"></center>'
				elseif milkedvolume > 50 and milkedvolume <= 1500:
					'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
					'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it. The pump starts to draw milk from your breast.'
					'You go on for a minute and then detach the pump. You collected <<milkedvolume/10>>ml of your breastmilk.'
					'<br><center><img <<$set_imgh>> src="images/pc/body/tits/pump_half.jpg"></center>'
				else
					'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
					'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it. The pump starts to draw milk from your breast.'
					'You go on for a minute and then detach the pump. You easily filed the breast pump bottle with your breast milk just with this little pumping.'
					'<br><center><img <<$set_imgh>> src="images/pc/body/tits/pump_full.jpg"></center>'
				end
				'You nod at the breast pump, thinking it will come in handy.'
			elseif lactate > 0 and milkedvolume <= 0:
				'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
				'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it.'
				'You go on for a minute and then detach the pump. You collected some milk, but it is just a small puddle in the bottle.'
				'<br><center><img <<$set_imgh>> src="images/pc/body/tits/pump_milkdrops.jpg"></center>'
			else
				'You start to squeeze the bulb. Your nipple is sucked into the cone, getting elongated a bit. It feels weird at first and you release the lever, the sucktion on your nipple goes away and the nipple retracts.'
				'With your hand you squeeze down again, your nipple sucked in again. You go on, and start to rythmically squeeze it.'
				'You go on for a minute and then detach the pump. As expected no milk was collected in the bottle.'
				'<br><center><img <<$set_imgh>> src="images/pc/body/tits/breast_pump.jpg"></center>'
			end
			act 'continue':
				*clr
				cla
				if milkedvolume > 50 and $location_type = 'private':
					'You look at the milk in the bottle and then around the room. Having no idea what to do with the excess milk, you look at it and suddenly sip it down.'
					'It is your milk, so it should be okay to drink it.'
					'<center><img <<$set_imgh>> src="images/pc/body/tits/milk_drink.jpg"></center>'
					'<center>The milk is still warm from your breasts.</center>'
					pcs_health += milkedvolume/400
					pcs_energy += milkedvolume/500
					if pcs_hydra >= 100:
						pcs_hydra += milkedvolume/200
					else
						pcs_hydra += milkedvolume/100
					end
					minut += ((milkedvolume/1000) + 3)
					act 'Finish': menu_off = 0 & gt $loc, $metka
				else
					'You clean up your pump and cover your breasts again.'
					act 'Finish': menu_off = 0 & gt $loc, $metka
				end
			end
		end
	elseif bp_unbox >= 2:
		*clr
		cla
		'You unboxed your breast pump already.'
		act 'Finish': menu_off = 0 & gt $loc, $metka
	end
end

!!	milking
!!	never use directly. Always use bp_milking, man_milking or sex_milking

if $ARGS[0] = 'milking':
	!!	if pumptime <= 0 or pumptime > 60:
	!!		act 'Finish':gt $loc, $metka
	!!	end
	if pumptype = 1:
		pumptime = (pumptime*6)/10
	end

		!!	:loop
		!!	if k < kid:
		!!	gs 'kid','kidlist'
		!!	k += 1
		!!	jump 'loop'
		!! end
	if lactate > 0 and pain['nipples'] < 60:
		milkedvolume = func('lact_lib','$get_breastmilk', 3, pumptime)
		'<center><img <<$set_imgh>> src="images/pc/body/tits/pump_lactating.jpg"></center>'
		if pumptime > 1:
			'You attach the pump to your breast and start rythmically squeezing the bulb for <<pumptime>> minutes.'
		else
			'You attach the pump to your breast and start rythmically squeezing the bulb for one minute.'
		end
		!!	Fill the bottles :D
		if milkedvolume > pump_bottletype and (bpbottles*1500 + bpbottlem*2500) = pump_bottletype:
			'During pumping you have to empty the collecting bottle as it filled up with your milk.'
			'You give it a few more pumps and detach the pump.<br>You filled the bottle with <<pump_bottletype/10>>ml of your milk.'
			'To collect all your pumped milk you should probably check if the pharmacy has additional bottles for your breast pump.'
			pcs_knowsmilkbottles = 1
		elseif milkedvolume > pump_bottletype and (bpbottles*1500 + bpbottlem*2500) > pump_bottletype:
			!!	Checking which bottletype is used and filling those bottles up before the other type is used.
			bp_used_mbottle = 0
			bp_used_sbottle = 0
			:sbottleloop
			if pump_bottletype < 2500 and milkedvolume >= 1500 and bp_used_sbottle < bpbottles:
				bp_used_sbottle += 1
				milkedvolume -= 1500
				jump 'sbottleloop'
			end
			:mbottleloop
			if pump_bottletype >= 2500 and milkedvolume >= 2500 and bp_used_mbottle < bpbottlem:
				bp_used_mbottle += 1
				milkedvolume -= 2500
				jump 'mbottleloop'
			end
			!!	Checking for the milkedvolume and if there are bottles left. if yes - use these bottles
			if milkedvolume > 0 and (((bpbottlem - bp_used_mbottle) > 0) or ((bpbottles - bp_used_sbottle) > 0)):
				:altfill01
				if pump_bottletype < 2500 and milkedvolume >= 2500 and bp_used_mbottle < bpbottlem:
					bp_used_mbottle += 1
					milkedvolume -= 2500
					jump 'altfill01'
				end
				:altfill02
				if pump_bottletype >= 2500 and milkedvolume >= 1500 and bp_used_sbottle < bpbottles:
					bp_used_sbottle += 1
					milkedvolume -= 1500
					jump 'altfill02'
				end
			end
			!!	by this point all bottles should have been used up. Everything else needs to end up in the drain.
			if milkedvolume > 0 and bpbottlem = bp_used_mbottle and bpbottles = bp_used_sbottle:
				'During pumping you have to switch the collecting bottle as it filled up with your milk. Unfortunately you don''t have enough bottles to collect all your milk.'
				'You had to pour <<milkedvolume/10>>ml of your breast milk into the sink.'
				milkedvolume = ((bp_used_mbottle*2500) + (bp_used_sbottle*1500))
			elseif milkedvolume > 0 and milkedvolume < 1500 and (bpbottles - bp_used_sbottle) > 0:
				'During pumping you have to switch the collecting bottle as it filled up with your milk.'
			elseif milkedvolume > 0 and milkedvolume < 2500 and milkedvolume > 1500 and (bpbottlem - bp_used_mbottle) > 0:
				'During pumping you have to switch the collecting bottle as it filled up with your milk.'
			else
				'During pumping you have to switch the collecting bottle as it filled up with your milk.'
			end
			if bp_used_mbottle >= 1 or bp_used_sbottle >= 1:
				'<center><img <<$set_imgh>> src="images/pc/body/tits/bottles_full.jpg"></center>'
				if milkedvolume = ((bp_used_mbottle*2500) + (bp_used_sbottle*1500)):
					'You pumped <<milkedvolume/10>>ml of milk from your breasts, collecting it in:'
					if bp_used_sbottle = 1:
						'One 150ml bottle'
					elseif bp_used_sbottle > 1:
						'<<bp_used_sbottle>> x 150ml bottles'
					end
					if bp_used_mbottle = 1:
						'One 250ml bottle'
					elseif bp_used_mbottle > 1:
						'<<bp_used_mbottle>> x 250ml bottles'
					end
				else
					'You pumped <<((bp_used_mbottle*2500)+(bp_used_sbottle*1500)+milkedvolume)/10>>ml of milk from your breasts collecting it in:'
					if bp_used_sbottle = 1:
						'One 150ml bottle'
					elseif bp_used_sbottle > 1:
						'<<bp_used_sbottle>> x 150ml bottles'
					end
					if bp_used_mbottle = 1:
						'One 250ml bottle'
					elseif bp_used_mbottle > 1:
						'<<bp_used_mbottle>> x 250ml bottles'
					end
					if (bpbottles - bp_used_sbottle) > 0 and milkedvolume <= 1500:
						'You also stored <<milkedvolume/10>>ml of breast milk in a 150ml bottle.'
					elseif (bpbottlem - bp_used_mbottle) > 0 and milkedvolume <= 2500:
						'You also stored <<milkedvolume/10>>ml of breast milk in a 250ml bottle.'
					else
						'unhandled case - you shouldn''t end up here. Please report this in the bug section of Girl Life in the tfg-forums.'
						'bp_used_mbottle: <<bp_used_mbottle>>'
						'bp_used_sbottle: <<bp_used_sbottle>>'
						'milkedvolume: <<milkedvolume>>'
						'pump_bottletype: <<pump_bottletype>>'
						'bpbottles: <<bpbottles>>'
						'bpbottlem: <<bpbottlem>>'
					end
					milkedvolume += bp_used_mbottle*2500 + bp_used_sbottle*1500
				end
			else
				'unhandled case - you shouldn''t end up here. Please report this in the bug section of Girl Life in the tfg-forums.'
				'bp_used_mbottle: <<bp_used_mbottle>>'
				'bp_used_sbottle: <<bp_used_sbottle>>'
				'milkedvolume: <<milkedvolume>>'
				'pump_bottletype: <<pump_bottletype>>'
				'bpbottles: <<bpbottles>>'
				'bpbottlem: <<bpbottlem>>'
			end
		else
			'You give it a few more pumps and detach the pump.<br>You filled the bottle with <<milkedvolume/10>>ml of your milk.'
		end
		breastcounter += 1
		if energytomilkpump > 0 and pcs_energy = 0:
			'<br>During pumping you feel really hungry, producing breast milk seems to be more exhausing then thought.'
			energytomilkpump = 0
		elseif energytomilkpump > 0:
			'<br>You feel a bit thirsty after pumping.'
			energytomilkpump = 0
		end
		if bcream_used = 1:
			pcs_nips += rand(0,2)
			bcream_used = 0
		end
		minut += pumptime
	elseif lactate = 0 and pain['nipples'] < 60:
		if rand(1,50) + prolactinlvl >= rand(200,250) and milkinduceday >= 5:
			'<center><img <<$set_imgh>> src="images/pc/body/tits/lactate_start.jpg"></center>'
			'As usual, you attach the pump but after a few pumps white liquid suddenly starts flowing from your nipples.<br>You started lactating!'
			lactateinduced = 1
			lactate = 1
			if func('lact_lib','$calc_lactatemm') > 0: lactatemm = func('lact_lib','$calc_lactatemm')
			if prolactinlvl < 200: prolactinlvl = 200
			lactaterate = 10*(prolactinlvl/200)
			pcs_nips += 2
			pumpinggrowth = 0
		else
			milkedvolume = func('lact_lib','$get_breastmilk', 3, pumptime)
			'<center><img <<$set_imgh>> src="images/pc/body/tits/t<<tits>>.jpg"></center>'
			if breastcounter < 100:
				'You attach the pump to your nipples and start squeezing the bulb. The vacuum feels uncomfortable on your nipples.'
			elseif breastcounter >= 100 and breastcounter < 200:
				'You attach the pump to your nipples and start squeezing the bulb. You are used to the vacuum on your nipples.'
			else
				'You attach the pump to your nipples and start squeezing the bulb. The vacuum feels good on your nipples.'
			end
			if prolactinlvl > 100: 'A few droplets of liquid come out of your nipples but it is not milk.'
			breastcounter += 1
			if pump_stop_brake = 1:
				'During pumping your nipples start to hurt extremely. You have to stop after <<pumptime>> minutes, because you couldn''t go on.'
			end
			if prolactinlvl > 100:
				if rand(0,10) > 9:
					pumpinggrowth += 1
				end
				'After finishing, your breasts feel weirdly engorged.'
			end
			if bcream_used = 1:
				pcs_nips += rand(0,2)
				bcream_used = 0
			end
		end
		minut += pumptime
	else
		'Your nipples feel too sore to use the pump right now.'
	end
	if milkedvolume > 0:
		lact_engorgement = 0
		lactatemess = 0
		act 'Pour it into the sink':
			*clr
			cla
			if milkedvolume > 1500 and bpbottles <= 1:
				'<center><img <<$set_imgh>> src="images/pc/body/tits/milk_sink.jpg"></center>'
				'<center>You pour 150ml of your breast milk into the sink and clean up your breastpump.</center>'
			else
				'<center><img <<$set_imgh>> src="images/pc/body/tits/milk_sink.jpg"></center>'
				'<center>You pour <<milkedvolume/10>>ml of your breast milk into the sink and clean up your breastpump.</center>'
			end
			minute += ((milkedvolume/1500) + 3)
			act 'Finish':
				milkedvolume = 0
				menu_off = 0 & gt $loc, $metka
			end
		end
		if pcs_hydra < 100:
			act 'Drink it':
				*clr
				cla
				'<center><img <<$set_imgh>> src="images/pc/body/tits/milk_drink.jpg"></center>'
				'<center>You drink your own breast milk and clean up your breastpump.</center>'
				'<center>The milk is still warm from your breasts.</center>'
				pcs_health += milkedvolume/400
				pcs_energy += milkedvolume/500
				if pcs_hydra >= 100:
					pcs_hydra += milkedvolume/200
				else
					pcs_hydra += milkedvolume/100
				end
				minute += ((milkedvolume/1000) + 3)
				act 'Finish':
					milkedvolume = 0
					menu_off = 0 & gt $loc, $metka
				end
			end
		end
	else
		act 'Finish':menu_off = 0 & gt $loc, $metka
	end
end

!!	engorged_morning
!!	use href="exec:gt ''lact_lib'',''engorged_morning''"

if $ARGS[0] = 'engorged_morning':
	minut += 5
	'<center><img <<$set_imgh>> src="images/pc/body/tits/lactate_start.jpg"></center>'
	'You wake up and your breasts hurt. As you look down, you can see that you have a heavy letdown. You should pump your breasts as soon as possible.'
	act 'Finish':menu_off = 0 & gt $loc, $metka
end

if $ARGS[0] = 'hand_milking':
	*clr
	cla
	if lactate > 0:
		'You start to massage your breasts, your fingers gliding down your breasts skin, over the areolas. Your fingers pressing down into the areola, stretching it forwards to your nipple.'
		'Several small streams of your milk start to jet out of your nipples.'
		'You go on for <<pumptime>> minutes until you stop. You clean yourself up and everything else that got wet from your milk.<br>'
		'<center><video autoplay loop src="images/pc/body/tits/bathroom_milking.mp4"></video></center>'
		milkedvolume = func('lact_lib','$get_breastmilk', 5, pumptime)
		minut += pumptime
	else
		'You start to massage your breasts, your fingers gliding down your breasts skin, over the areolas. Your fingers pressing down into the areola, stretching it forwards to your nipple,'
		'kneading your breasts as well.'
		'<center><video autoplay loop src="images/pc/body/tits/bathroom_massage.mp4"></video></center>'
		milkedvolume = func('lact_lib','$get_breastmilk', 5, pumptime)
		minut += pumptime
	end
	act 'Finish':menu_off = 0 & gt $loc, $metka
end

--- lact_lib ---------------------------------