glife/locations/shortgs.qsrc

# shortgs

!! following function counts the number of guys which PC slept with. 
!! use func('shortgs','guy') or func('shortgs','guy',X) for subset (X can be 'A','B','C','AB','AC','BC')
if $ARGS[0] = 'guy':
	r_sht=0
	if $ARGS[1] = '': $temptask = 'ABC' else $temptask = $ARGS[1]
	:loop_shtty
	$temptaskchar = mid($temptask,1,1) 
	$temptask = mid($temptask,2,len($temptask)-1)
	s_sht=0
	:loop_shya
	if s_sht<=dyneval("result = <<$temptaskchar>>arraynumber"):
		s_sht += 1
		if npc_sex['<<$temptaskchar>><<s_sht>>'] > 0: r_sht = r_sht + iif(npc_gender['<<$temptaskchar>><<s_sht>>'] = 0,1,0)
		jump 'loop_shya'
	end
	if len($temptask) > 0:jump 'loop_shtty'
	result = r_sht
	killvar 'r_sht'
	killvar '$temptask'
	killvar '$temptaskchar'
	killvar 's_sht'
end &! --- guy ---

!! following function counts the number of girls which PC slept with.
!! use func('shortgs','girl') or func('shortgs','girl',X) for subset (X can be 'A','B','C','AB','AC','BC')
if $ARGS[0] = 'girl':
	r_sht=0
	if $ARGS[1] = '': $temptask = 'ABC' else $temptask = $ARGS[1]
	:loop_shttl
	$temptaskchar = mid($temptask,1,1) 
	$temptask = mid($temptask,2,len($temptask)-1)
	s_sht=0
	:loop_shl
	if s_sht<=dyneval("result = <<$temptaskchar>>arraynumber"):
		s_sht += 1
		if npc_sex['<<$temptaskchar>><<s_sht>>'] > 0: r_sht = r_sht + iif(npc_gender['<<$temptaskchar>><<s_sht>>'] = 1,1,0)
		jump 'loop_shl'
	end
	if len($temptask) > 0: jump 'loop_shttl'
	result = r_sht
	killvar 'r_sht'
	killvar '$temptask'
	killvar '$temptaskchar'
	killvar 's_sht'
end &! --- girl ---

!! following procedure should be used when PC gets naked, but it should be paired with the reverse procedure 
!! use gs 'shortgs','undress'
if $ARGS[0] = 'undress':
	gs 'clothing','strip'
	gs 'underwear', 'remove'
end &! --- undress ---

!! reverse procedure, it can be modified for lose or stolen panties later. 
!! use gs 'shortgs','dress'
if $ARGS[0] = 'dress':
	gs 'clothing','wear_last_worn'
	gs 'underwear', 'wear'
end &! --- dress ---

!! procedure, which prevents PC to leave a room naked.  
!! use gs 'shortgs','checkdress',' <<$loc>>,<<$metka>> '  or equivalent
if $ARGS[0] = 'checkdress':
	if $clothingworntype = 'nude':
		msg '<b><font color="red">You need to get dressed before going out.</font></b>'
		dynamic 'gt <<$ARGS[1]>>'
	end
end &! --- checkdress ---

!! this is an integer sqrt function
!! call func('shortgs','sqrt', n)
if $ARGS[0] = 'sqrt':
	sqrtnum = ARGS[1]
	if sqrtnum = 0: result = 0 & exit
	sqrtn = sqrtnum/2 + 1
	sqrtn1 = (sqrtn + sqrtnum / sqrtn) / 2
:sqrtloop
	if sqrtn1 < sqrtn:
		sqrtn = sqrtn1
		sqrtn1 = (sqrtn + sqrtnum / sqrtn) / 2
		jump 'sqrtloop'
	end
	result = sqrtn  
end

!! this function calculates modul of given arguments as it was coordinates in cartezian systeme
!! use func('shortgs','modul',n1,n2,..n8)
if $ARGS[0] = 'modul':
	modul_sum = ARGS[1]*ARGS[1]+ARGS[2]*ARGS[2]+ARGS[3]*ARGS[3]+ARGS[4]*ARGS[4]+ARGS[5]*ARGS[5]+ARGS[6]*ARGS[6]+ARGS[7]*ARGS[7]+ARGS[8]*ARGS[8]
	result = func('shortgs','sqrt',modul_sum)
	killvar 'modul_sum'
end
!! day of week 1 - Monday .. 7 - Sunday
if $ARGS[0] = 'dow':
	if ARGS[1]=0:
		D_dow = day
		M_dow = month
		Y_dow = year
	else
		D_dow = ARGS[3]
		M_dow = ARGS[2]
		Y_dow = ARGS[1]
	end
	dow_a = (14 - M_dow) / 12
	dow_Y = Y_dow - dow_a
	dow_M = M_dow + 12*dow_a - 2
	dummy = (D_dow + dow_y + dow_y/4 - dow_y/100 + dow_y/400 + (31*dow_m)/12) mod 7
	if dummy = 0: dummy = 7
	result = dummy
end
!! day of year
!! use xdoy = func('shortgs','doy',year,month,day) 
if $ARGS[0] = 'doy':
	doy_N1 = 275 * ARGS[2] / 9
	doy_N2 = (ARGS[2] + 9) / 12
	doy_N3 = 1 + (ARGS[1] - 4 * (ARGS[1] / 4) + 2) / 3
	result = doy_N1 - (doy_N2 * doy_N3) + ARGS[3] - 30
end
if $ARGS[0] = 'mk1':
	gs 'saveposition'
	*clr & cla
	$mk_subst['0'] = 'M' & $mk_subst['1'] = 'F' & $mk_subst['2'] = 'O' & $mk_subst['3'] = 'L' & $mk_subst['4'] = 'R' & $mk_subst['5'] = 'P'
	'<center><font face="courier" size=1>'
	'<table border = 1>'
	'<tr><th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th><th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th>
	<th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th><th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th></tr>'
	i = ArrSize('$MenCal')

	empty0 = week + 29 - i - 1

	empty1 = min(28,empty0)
	full1 = max(0,28 - empty0)

	empty2 = max(0,empty0-28)
	full2 = i - full1
	empty3 = 28 - empty2 - full2
	count=0

	$tabmc = '<tr>'
:tabmcl1
	if empty1 > 0: empty1 -=1 & $tabmc +='<td>&nbsp</td>' & jump 'tabmcl1'
:tabmcl2
	if full1 > 0: 
		full1 -=1 
		if $MenCal[count]='0': $tabmc +='<td bgcolor="red"><<$mk_subst[$MenCal[count]]>></td>' else $tabmc +='<td><<$mk_subst[$MenCal[count]]>></td>'
		count +=1
		jump 'tabmcl1'
	end
	$tabmc += '</tr><tr>'
:tabmcl3
	if empty2 > 0: empty2 -=1 & $tabmc +='<td>&nbsp</td>' & jump 'tabmcl3'
:tabmcl4
	if full2 > 0:
		full2 -=1
		if $MenCal[count]='0': $tabmc +='<td bgcolor="red"><<$mk_subst[$MenCal[count]]>></td>' else $tabmc +='<td><<$mk_subst[$MenCal[count]]>></td>'
		count +=1
		jump 'tabmcl4'
	end
:tabmcl5
	if empty3 > 0: empty3 -=1 & $tabmc +='<td></td>' & jump 'tabmcl5'
	$tabmc += '</tr><table></font></center>'
	$tabmc
	act 'Back': gt 'restoreposition'
end

!! use gs 'shortgs','mk'
if $ARGS[0] = 'mk':
	gs 'saveposition'
	*clr & cla
	copyarr '$MenCalCopy','$MenCal'
	length_of_month_field = arrsize('$MenCalCopy')
	if daystart - firstmens > 40:
		mensnotfound = 1
		i = 0
:tabmcfm
		if $MenCalCopy[length_of_month_field-i] = '0' and $MenCalCopy[length_of_month_field-i-1] = '3': mensnotfound = 0
		i += 1
		if i < length_of_month_field and mensnotfound = 1: jump 'tabmcfm'
		if mensnotfound = 0:
			firstmens = daystart - i + 1
		end
	end
	i=1
:tabmcc1
	if daystart - firstmens < 40:
		if (daystart - firstmens + i) = 28:
			$MenCalCopy[] = ' bgcolor="#df2020"'
		elseif (daystart - firstmens + i) = 29:
			$MenCalCopy[] = ' bgcolor="#df3030"'
		elseif (daystart - firstmens + i) = 30:
			$MenCalCopy[] = ' bgcolor="#df4040"'
		elseif (daystart - firstmens + i) = 12:
			$MenCalCopy[] = ' bgcolor="#d8ff00"'
		elseif (daystart - firstmens + i) = 13:
			$MenCalCopy[] = ' bgcolor="#d0ff00"'
		elseif (daystart - firstmens + i) = 14:
			$MenCalCopy[] = ' bgcolor="#c8ff00"'
		elseif (daystart - firstmens + i) = 15:
			$MenCalCopy[] = ' bgcolor="#c0ff00"'
		elseif (daystart - firstmens + i) = 16:
			$MenCalCopy[] = ' bgcolor="#d0ff00"'
		elseif (daystart - firstmens + i) = 12+28:
			$MenCalCopy[] = ' bgcolor="#d8ff00"'
		elseif (daystart - firstmens + i) = 13+28:
			$MenCalCopy[] = ' bgcolor="#d0ff00"'
		elseif (daystart - firstmens + i) = 14+28:
			$MenCalCopy[] = ' bgcolor="#c8ff00"'
		elseif (daystart - firstmens + i) = 15+28:
			$MenCalCopy[] = ' bgcolor="#c0ff00"'
		elseif (daystart - firstmens + i) = 16+28:
			$MenCalCopy[] = ' bgcolor="#d0ff00"'
		else
			$MenCalCopy[] = ''
		end
		i += 1
		if i < 40: jump 'tabmcc1'
	end
	i = length_of_month_field
:tabmcc2
	if i > 0:
		if $MenCalCopy[i-1] = '2' and i = 1 : $MenCalCopy[i-1] = ' bgcolor="#c0ff00"'
		if $MenCalCopy[i-1] = '2' and $MenCalCopy[i-2] = '2': $MenCalCopy[i-1] = ' bgcolor="#c0ff00"'
		if $MenCalCopy[i-1] = '2' and $MenCalCopy[i-2] = '1': $MenCalCopy[i-1] = ' bgcolor="#80ff00"' & $MenCalCopy[i-2] = ' bgcolor="#90ff00"' & $MenCalCopy[i-3] = ' bgcolor="#a0ff00"' & $MenCalCopy[i-4] = ' bgcolor="#b0ff00"' & $MenCalCopy[i-5] = ' bgcolor="#c0ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) < 12: $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) = 12: $MenCalCopy[i-1] =' bgcolor="#b0ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) = 13: $MenCalCopy[i-1] =' bgcolor="#a0ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) = 14: $MenCalCopy[i-1] =' bgcolor="#90ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) = 15: $MenCalCopy[i-1] =' bgcolor="#80ff00"'
		if $MenCalCopy[i-1] = '1' and (daystart - firstmens - length_of_month_field + i) > 15: $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '0': $MenCalCopy[i-1] =' bgcolor="#df2020"'
		if $MenCalCopy[i-1] = '3': $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '4': $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '5': $MenCalCopy[i-1] =''
		if $MenCalCopy[i-1] = '6': $MenCalCopy[i-1] =''
		i -= 1
		jump 'tabmcc2'
	end

	cur_day_doy = func('shortgs','doy',year,month,day)
	if month = 1:
		dif_days = cur_day_doy + 30
		prev_month = 12
		prev_month_length = 31
	else
		prev_month = month - 1
		dif_days = cur_day_doy - func('shortgs','doy',year,prev_month,1)
		prev_month_length = func('shortgs','doy',year,month,1) - func('shortgs','doy',year,prev_month,1)
	end
	first_month_first_day_week = week - (dif_days mod 7)
	first_month_first_day_index = length_of_month_field -1 - dif_days
	r = first_month_first_day_index
	if first_month_first_day_week < 1: first_month_first_day_week += 7
	i = 42
:tabmc21
	$mk1_mdays[] = '&nbsp' & i -= 1 & if i > 0: jump 'tabmc21'
	i = 0
:tabmc21a
	$mk1_mdays[i+first_month_first_day_week-1] = $str(i+1) 
	i += 1 
	if i < prev_month_length: jump 'tabmc21a'

	$prev_month_name = $mid($monthName[prev_month],1,1) + '<br>' + $mid($monthName[prev_month],2,1) + '<br>' + $mid($monthName[prev_month],3,1)

	k = 0
	$tabmc ='<center><font face="courier" size=5>'
	$tabmc +='<table border = 1 cellspacing="0" cellpadding="5">'
	$tabmc +='<tr><th>Month</th><th>Mon</th><th>Tue</th><th>Wen</th><th>Thu</th><th>Fri</th><th>Sat</th><th>Sun</th></tr>'
	month_weeks = (first_month_first_day_week + prev_month_length + 5)/7 - 1
	i = month_weeks
:tabmc22
	$tabmc +='<tr>'
	j = 7
	if i = month_weeks:$tabmc +='<td rowspan="<<month_weeks+1>>" align = "center"><<$prev_month_name>></td>'
:tabmc23
	if j > 0: 
		j -=1 
		if $mk1_mdays[k]='&nbsp':
			$tabmc +='<td><<$mk1_mdays[k]>></td>'
		else
			$tabmc +='<td<<$MenCalCopy[r]>> ><<$mk1_mdays[k]>></td>'
			r +=1
		end
		k +=1
		jump 'tabmc23' & !<<$MenCalCopy[r]>> 
	end
	if i > 0: i -=1 & $tabmc +='</tr>' & jump 'tabmc22'
	killvar '$mk1_mdays'
	killvar '$mk1_mdays_color'

!! current month
	if month = 12:
		dif_days = day - 1
		cur_month = month
		cur_month_length = 31
	else
		dif_days = day - 1
		cur_month_length = func('shortgs','doy',year,month+1,1) - func('shortgs','doy',year,month,1)
	end
	second_month_first_day_week = week - (dif_days mod 7)
	second_month_first_day_index = length_of_month_field -1 - dif_days
	
	if second_month_first_day_week < 1: second_month_first_day_week += 7
	i = 42
	:tabmc31
	$mk1_mdays[] = '&nbsp' & i -= 1 & if i > 0: jump 'tabmc31'
	i = 0
:tabmc31a
	$mk1_mdays[i+second_month_first_day_week-1] = $str(i+1) 
	i += 1 
	if i < cur_month_length: jump 'tabmc31a'

	$cur_month_name = $mid($monthName[month],1,1) + '<br>' + $mid($monthName[month],2,1) + '<br>' + $mid($monthName[month],3,1)

	k = 0
	month_weeks = (second_month_first_day_week + cur_month_length + 5)/7 - 1
	i = month_weeks
:tabmc32
	$tabmc +='<tr>'
	j = 7
	if i = month_weeks:$tabmc +='<td rowspan="<<month_weeks+1>>" align = "center"><<$cur_month_name>></td>'
:tabmc33
	if j > 0: 
		j -=1
		if $mk1_mdays[k]='&nbsp':
			$tabmc +='<td><<$mk1_mdays[k]>></td>'
		else
			if day + second_month_first_day_week - 2 = k: $tabmc +='<td<<$MenCalCopy[r]>> ><u><b><<$mk1_mdays[k]>></b></u></td>' else $tabmc +='<td<<$MenCalCopy[r]>> ><<$mk1_mdays[k]>></td>'
			r +=1
		end
		k +=1 
		jump 'tabmc33'
	end
	if i > 0: i -=1 & $tabmc +='</tr>' & jump 'tabmc32'
	killvar '$mk1_mdays'
	killvar '$mk1_mdays_color'
	
!! next month
	if month = 12:
		dif_days = 31 - day + 1
		next_month = 1
		next_month_length = 31
	elseif month = 11:
		dif_days = 30 - day + 1
		next_month = 12
		next_month_length = 31
	else
		next_month = month + 1
		dif_days = cur_month_length - day + 1
		next_month_length = func('shortgs','doy',year,month+2,1) - func('shortgs','doy',year,month+1,1)
	end
	next_month_first_day_week = week + (dif_days mod 7)
	next_month_first_day_index = length_of_month_field -1 - dif_days
	
	if next_month_first_day_week < 1: next_month_first_day_week += 7
	i = 35
:tabmc41
	$mk1_mdays[] = '&nbsp' & i -= 1 & if i > 0: jump 'tabmc41'
	i = 0
:tabmc41a
	$mk1_mdays[i+next_month_first_day_week-1] = $str(i+1) 
!!	if next_month_first_day_index + i >= 0: $mk1_mdays[i+next_month_first_day_week-1] += $mk_subst[$MenCal[second_month_first_day_index + i]]
	i += 1 
	if i < next_month_length: jump 'tabmc41a'

	$next_month_name = $mid($monthName[next_month],1,1) + '<br>' + $mid($monthName[next_month],2,1) + '<br>' + $mid($monthName[next_month],3,1)

	k = 0
	month_weeks = (next_month_first_day_week + next_month_length + 5)/7 - 1
	i = month_weeks
:tabmc42
	$tabmc +='<tr>'
	j = 7
	if i = month_weeks:$tabmc +='<td rowspan="<<month_weeks+1>>" align = "center"><<$next_month_name>></td>'
:tabmc43
	if j > 0: 
		j -=1
		if $mk1_mdays[k]='&nbsp':
			$tabmc +='<td><<$mk1_mdays[k]>></td>'
		else
			$tabmc +='<td<<$MenCalCopy[r]>> ><<$mk1_mdays[k]>></td>'
			r +=1
		end
		k +=1
		jump 'tabmc43'
	end
	if i > 0: i -=1 & $tabmc +='</tr>' & jump 'tabmc42'
	killvar '$mk1_mdays'

	
	$tabmc += '</tr><table></font></center>'
	$tabmc
	act 'Back': gt 'restoreposition'
end

!! gs 'shortgs','fonts'
if $ARGS[0] = 'fonts':
	if $ARGS[1] = 'refresh': 
		jump 'fontsloop'
	else
		$dynamicreturn = $ARGS[1]
		$OpenPhraseSave = $ARGS[2]
		$ClosePhraseSave = $ARGS[3]
	end
	gs 'saveposition'
	$fontlist[] = 'Lucida' & $fontlist[] = 'Ariel' & $fontlist[] = 'Tahoma' & $fontlist[] = 'Verdana' & $fontlist[] = 'Courier New' & $fontlist[] = 'Courier' & $fontlist[] = 'Georgia' & $fontlist[] = 'Times New Roman' & $fontlist[] = 'Garamond' & $fontlist[] = 'Bookman' & $fontlist[] = 'Times New Roman' & $fontlist[] = 'Times' & $fontlist[] = 'Comic Sans MS' & $fontlist[] = 'Trebuchet MS' & $fontlist[] = 'Impact' & $fontlist[] = 'BankGothic'
	$fontcolor[] = 'aqua' & $fontcolor[] = 'black' & $fontcolor[] = 'blue' & $fontcolor[] = 'magenta' & $fontcolor[] = 'green' & $fontcolor[] = 'gray' & $fontcolor[] = 'lime' & $fontcolor[] = 'maroon' & $fontcolor[] = 'navy' & $fontcolor[] = 'olive' & $fontcolor[] = 'purple' & $fontcolor[] = 'red' & $fontcolor[] = 'silver' & $fontcolor[] = 'teal' & $fontcolor[] = 'white' & $fontcolor[] = 'yellow' 
	i = 15
:fontsloop0
	if $CurFont = $fontlist[i]: curfont = i
	if $CurColor = $fontcolor[i]: curcolor = i
	i -= 1
	if i > 0: jump 'fontsloop0'
	jump 'fontsloop1'
:fontsloop
	$OpenPhrase = '<font size="<<CurFontSize>>" color="<<$CurColor>>" face="<<$CurFont>>" >'+$CurBold+$CurItalic
	$ClosePhrase = $CurItalicBack+$CurBoldBack+'</font>'
:fontsloop1
	*clr & cla
	$OpenPhrase+'Current font is <<$CurFont>> Size <<CurFontSize>>, the color is <<$CurColor>>, the Bold is <<iif($CurBold = ''<b>'',''On'',''Off'')>> and Italic is <<iif($CurItalic = ''<i>'',''On'',''Off'')>>'+$ClosePhrase
	'<a href="exec: curfont = (curfont + 1) mod 16 & $CurFont = $fontlist[curfont] & gs ''shortgs'',''fonts'',''refresh'' ">Change the Font</a>'
	'<a href="exec: curcolor = (curcolor + 1) mod 16 & $CurColor = $fontcolor[curcolor] & gs ''shortgs'',''fonts'',''refresh'' ">Change the Color</a>'
	'<a href="exec:$CurBold = iif($CurBold ! ''<b>'',''<b>'','' '') & $CurBoldBack = iif($CurBold = ''<b>'',''</b>'','' '') & gs ''shortgs'',''fonts'',''refresh'' ">Change the BoldState</a>'
	'<a href="exec:$CurItalic = iif($CurItalic ! ''<i>'',''<i>'','' '') & $CurItalicBack = iif($CurItalic = ''<i>'',''</i>'','' '') & gs ''shortgs'',''fonts'',''refresh'' ">Change the ItalicState</a>'
	'<a href="exec:CurfontSize -= 1 & gs ''shortgs'',''fonts'',''refresh'' ">Decrease the Font</a>&nbsp&nbsp&nbsp<a href="exec:CurfontSize += 1 & gs ''shortgs'',''fonts'',''refresh'' ">Increase the font</a>'

	act 'Back': 
		killvar '$fontlist'
		killvar '$fontcolor'
		dynamic '<<$OpenPhraseSave>> = $OpenPhrase'
		dynamic '<<$ClosePhraseSave>> = $ClosePhrase'
		if $dynamicreturn ! '': dynamic 'dynamic <<$dynamicreturn>>'
		gt 'restoreposition'
	end
end

!! use gs 'shortgs','ncp_update'
if $ARGS[0] = 'ncp_update':
	copyarr 'copy_npc_QW','npc_QW'
	copyarr 'copy_npc_rel','npc_rel'
	copyarr 'copy_npc_love','npc_love'
	copyarr '$copy_npc_usedname','$npc_usedname'
	gs 'npcstatic1'
	gs 'npcstatic2'
	gs 'npcstatic3'
	gs 'npcstatic4'
	gs 'npcstatic5'
	i = arrsize('copy_npc_QW')
	j = 1
:loopnpcupdate
	$boy = 'A<<j>>'
	npc_QW[$boy] = copy_npc_QW[$boy]
	npc_rel[$boy] = copy_npc_rel[$boy]
	npc_love[$boy] = copy_npc_love[$boy]
	$npc_usedname[$boy] = $copy_npc_usedname[$boy]
	j += 1
	if j <= i: jump 'loopnpcupdate'
	killvar 'copy_npc_QW'
	killvar 'copy_npc_rel'
	killvar 'copy_npc_love'
	killvar '$copy_npc_usedname'
end

!! this function returns the numeric index of the array element which is indexed by string value.
!! call func('shortgs', 'get_me_index', 'name of array','string index')
!! the array can be both numeric or string: Be aware, for the search is used the value 'SearchTag' for string arrays and -999 for numeric arrays.
!! if the array consists such value, the fuction can mess the array content and return wrong value
if $ARGS[0] = 'get_me_index':
	$test = '<<$ARGS[1]>>[''<<$ARGS[2]>>'']'
	testas0 = arrsize('<<$ARGS[1]>>')
	if $mid($test,1,1)='$':
		$temp=dyneval('$result=<<$test>>')
		dynamic '<<$test>> = ''SearchTag'' '
		testas1 = arrsize('<<$ARGS[1]>>')
		if testas0 = testas1:
			if Enable_Android = 1:
				res = dyneval('result = arrpos(''<<$ARGS[1]>>'',''SearchTag'',0)')
			else
				res = dyneval('result = arrpos(0,''<<$ARGS[1]>>'',''SearchTag'')')
			end
			dynamic '<<$test>> = ''<<$temp>>'' '
		else
			res = -1
			killvar '<<$ARGS[1]>>',testas0
		end
	else
		temp=dyneval('result=<<$test>>')
		dynamic '<<$test>> = -999'
		testas1 = arrsize('<<$ARGS[1]>>')
		if testas0 = testas1:
			if Enable_Android = 1:
				res = dyneval('result = arrpos(''<<$ARGS[1]>>'',-999,0)')
			else
				res = dyneval('result = arrpos(0,''<<$ARGS[1]>>'',-999)')
			end
			dynamic '<<$test>> = <<temp>>'
		else
			res = -1
			killvar '<<$ARGS[1]>>',testas0
		end
	end
	result = res
end


!! call gs 'shortgs', 'remove_array_element', 'name of array','string index'
if $ARGS[0] = 'remove_array_element':
	i = func('shortgs', 'get_me_index', $ARGS[1],$ARGS[2])
	killvar '<<$ARGS[1]>>',i
end

if $ARGS[0] = 'testsize':

	arrsize('$npc_cur_rel')
	arrsize('$npc_dad')
	arrsize('$npc_dna')
	arrsize('$npc_firstname')
	arrsize('$npc_firstpart')
	arrsize('$npc_kidpater')
	arrsize('$npc_lastname')
	arrsize('$npc_lastpart')
	arrsize('$npc_mom')
	arrsize('$npc_nickname')
	arrsize('$npc_notes')
	arrsize('$npc_orgasm_txt')
	arrsize('$npc_PersType')
	arrsize('$npc_pic')
	arrsize('$npc_rel')
	arrsize('$npc_thdick')
	arrsize('$npc_usedname')
	arrsize('npc_agil')
	arrsize('npc_apprnc')
	arrsize('npc_ass')
	arrsize('npc_bodyhair')
	arrsize('npc_breath')
	arrsize('npc_bust')
	arrsize('npc_cloc')
	arrsize('npc_clothpref')
	arrsize('npc_cyc')
	arrsize('npc_dance')
	arrsize('npc_danceero')
	arrsize('npc_def')
	arrsize('npc_dick')
	arrsize('npc_dnc')
	arrsize('npc_dob')
	arrsize('npc_dom')
	arrsize('npc_drunk')
	arrsize('npc_dye')
	arrsize('npc_erodnc')
	arrsize('npc_eyecol')
	arrsize('npc_eyesize')
	arrsize('npc_fat')
	arrsize('npc_fert')
	arrsize('npc_gender')
	arrsize('npc_genwart')
	arrsize('npc_glasses')
	arrsize('npc_Godrep')
	arrsize('npc_gon')
	arrsize('npc_grades')
	arrsize('npc_hairbsh')
	arrsize('npc_haircol')
	arrsize('npc_haircurl')
	arrsize('npc_hairlng')
	arrsize('npc_herpes')
	arrsize('npc_hgt')
	arrsize('npc_hipcurv')
	arrsize('npc_Hiv')
	arrsize('npc_horny')
	arrsize('npc_hymen')
	arrsize('npc_chem')
	arrsize('npc_chess')
	arrsize('npc_chlam')
	arrsize('npc_intel')
	arrsize('npc_jab')
	arrsize('npc_job')
	arrsize('npc_kick')
	arrsize('npc_lashes')
	arrsize('npc_lip')
	arrsize('npc_lipbalm')
	arrsize('npc_love')
	arrsize('npc_magik')
	arrsize('npc_makeup')
	arrsize('npc_malen')
	arrsize('npc_nerd')
	arrsize('npc_nips')
	arrsize('npc_orgasm_txt')
	arrsize('npc_pantys')
	arrsize('npc_Pavrep')
	arrsize('npc_pubes')
	arrsize('npc_punch')
	arrsize('npc_Qstlvl')
	arrsize('npc_QW')
	arrsize('npc_rel')
	arrsize('npc_run')
	arrsize('npc_serving')
	arrsize('npc_sewing')
	arrsize('npc_sex')
	arrsize('npc_sexskill')
	arrsize('npc_shoot')
	arrsize('npc_skin')
	arrsize('npc_spermpot')
	arrsize('npc_sprt')
	arrsize('npc_stren')
	arrsize('npc_sub')
	arrsize('npc_sweat')
	arrsize('npc_syth')
	arrsize('npc_tan')
	arrsize('npc_teach')
	arrsize('npc_thrush')
	arrsize('npc_vag')
	arrsize('npc_vball')
	arrsize('npc_vital')
	arrsize('npc_vokal')
	arrsize('npcbrokehymen')
end

if $ARGS[0] = 'replace header':
	wait(ARGS[1])
	RH_Count = ARGS[2]
	$RH_temp = $MAINTXT
:RH_label
	RH_temp_lenght = LEN($RH_temp)
	RH_temp_LFpos = STRPOS($RH_temp,'\n')
	$RH_temp = $MID($RH_temp, RH_temp_LFpos+1, RH_temp_lenght - RH_temp_LFpos)
	RH_Count -=1
	if RH_Count > 0: jump 'RH_label'
	*clr
	$ARGS[3] & $ARGS[4] & $ARGS[5] & $ARGS[6] & $ARGS[7]
	$RH_temp
	killvar '$RH_temp'
	killvar 'RH_Count'
	killvar 'RH_temp_lenght'
	killvar 'RH_temp_LFpos'
end

if $ARGS[0]='img msg':
	$shortgstemp = '<center><img height=280 src="<<$ARGS[1]>>"></center>'
	msg $shortgstemp
	killvar '$shortgstemp'
end

!! Used for dividing with accurate rounding up/down
if $ARGS[0] = 'round_divide':
	!! ARGS[1] = value you want divided
	!! ARGS[2] = divider
	!!  func('shortgs','round_divide', number, divider)
	!!  func('shortgs','round_divide', 12345, 7)
	if ARGS[2] ! 0:
		temp_number = ARGS[1]/ARGS[2]
		if (ARGS[2] mod 2 ! 0 and ARGS[1] mod ARGS[2] > ARGS[2]/2) or (ARGS[2] mod 2 = 0 and ARGS[1] mod ARGS[2] >= ARGS[2]/2): temp_number += 1
		result = temp_number
		killvar 'temp_number'
	else
		msg '<b>Error: No dividing by 0! You trying to make the universe disappear?</b>'
	end
end

!! Used for rounding numbers to the nearest multiple of ARGS[2]
if $ARGS[0] = 'round_tool':
	!! ARGS[1] = value you want rounded
	!! ARGS[2] = nearest multiple to round to
	!!  func('shortgs','round_tool', number, multiple)
	!!  func('shortgs','round_tool', 12345, 10)
	if ARGS[2] ! 0:
		temp_multiple = ARGS[2]
		result = func('shortgs','round_divide', ARGS[1], ARGS[2]) * temp_multiple
		killvar 'temp_multiple'
	else
		msg '<b>Error: Can''t round to 0!</b>'
	end
end

!! Randomly picks one of the items plugged in
!!
!!  Option 1: (has 6 input limit)
!!  $ARGS[1] =		'string' or 'number' to specify what youre plugging in (can also be blank for numbers)
!!  $ARGS[2-7] =	 strings or numbers to pick from, limited to 6
!!  Example 1: func('shortgs', 'rand_pick', 'string', 'alpha', 'beta', 'gamma', 'delta', 'epsilon', 'zeta')
!!  Example 2: func('shortgs', 'rand_pick', '', 2, 3, 5, 7, 11, 13)
!!
!!  Option 2: (no limitations, has to be delimited)
!! 	$ARGS[1] =		'delimit'  -  used for larger numbers of items to pick from
!!  $ARGS[2] =		'string' or 'number' to specify what youre plugging in (can also be blank for numbers)
!!  $ARGS[3] =		 Delimited string to parse
!!  $ARGS[4] =		 Delimiter used (Default = '|' pipe)
!!  Example 1: func('shortgs', 'rand_pick', 'delimit', 'string', 'alpha|beta|gamma|delta|epsilon|zeta')
!!  Example 2: func('shortgs', 'rand_pick', 'delimit', 'number', '1-12-123-1234-12345-123456', '-')
!!  Example 3: func('shortgs', 'rand_pick', 'delimit', '', '0.1.2.3.5.7.11', '.')
if $ARGS[0] = 'rand_pick':
	if $ARGS[1] = 'delimit':
		if $ARGS[2] = 'string':
			gs 'shortgs', 'parse_string', '$rand_pick_temp', $ARGS[3], $ARGS[4]
			$result = $rand_pick_temp[rand(0, arrsize('$rand_pick_temp')-1)]
			killvar '$rand_pick_temp'
		else
			gs 'shortgs', 'parse_string', 'rand_pick_temp', $ARGS[3], $ARGS[4]
			result = rand_pick_temp[rand(0, arrsize('rand_pick_temp')-1)]
			killvar 'rand_pick_temp'
		end
	else
		if arrsize('ARGS') > 2:
			if $ARGS[1] = 'string':
				$result = $ARGS[rand(2, arrsize('$ARGS')-1)]
			else
				result = ARGS[rand(2, arrsize('ARGS')-1)]
			end
		else
			msg '<b>Error: ''rand_pick'' is missing ARGS</b>'
		end
	end
end

!! Parse delimited string into an array
!!	$ARGS[1] =		ArrayName (has to include $ for string values)
!!	$ARGS[2] =		Delimited string to parse
!!	$ARGS[3] =		Delimiter used (Default = '|' pipe)
!!  Example 1: gs 'shortgs', 'parse_string', '$my_array', 'alpha|beta|gamma|delta|epsilon|zeta'
!!  Example 2: gs 'shortgs', 'parse_string', 'my_array', '1-12-123-1234-12345-123456', '-'
if $ARGS[0] = 'parse_string':
	!! Some failsafes (blank array name, blank string or no delimiters in string)
	if $ARGS[1] ! '':
		if $ARGS[2] ! '' and instr($ARGS[2],iif($ARGS[3] = '', '|', $ARGS[3])) > 0:
			!! Set delimiter with default if needed
			if $ARGS[3] = '':
				$ParserTmpDelim = '|'
			else
				$ParserTmpDelim = $ARGS[3]
			end
			!! Clear temp array if needed
			killvar 'ParserTmpArr' & killvar '$ParserTmpArr'
			$ParserTmpStr = $ARGS[2]
			!! Loop through string until no more delimiters found
			:StringParser01
			ParserTmpIdx = instr($ParserTmpStr, $ParserTmpDelim)
			if ParserTmpIdx > 0:
				if mid($ARGS[1],1,1) = '$':
					$ParserTmpArr[] = mid($ParserTmpStr, 1, ParserTmpIdx-1)
					$ParserTmpStr = mid($ParserTmpStr, ParserTmpIdx+1)
				else
					ParserTmpArr[] = mid($ParserTmpStr, 1, ParserTmpIdx-1)
					$ParserTmpStr = mid($ParserTmpStr, ParserTmpIdx+1)
				end
				jump 'StringParser01'
			!! Get last part since no more delimiters were found and copy to the final array
			elseif mid($ARGS[1],1,1) = '$':
				$ParserTmpArr[] = $ParserTmpStr
				copyarr $ARGS[1], '$ParserTmpArr'
			else
				ParserTmpArr[] = $ParserTmpStr
				copyarr $ARGS[1], 'ParserTmpArr'
			end
			killvar '$ParserTmpDelim'
			killvar '$ParserTmpStr'
			killvar 'ParserTmpIdx'
			killvar 'ParserTmpArr' & killvar '$ParserTmpArr'
		else
			msg '<b>Error: No delimited string found!</b>'
		end
	else
		msg '<b>Error: No array name found!</b>'
	end
end

--- shortgs ---------------------------------