# lact_lib

if $ARGS[0] = '$get_bfat_tissue':
	!! func('lac_lib', 'get_bfattissue', npc_nbsize, npc_lactatemm)
	!! function to get breast fat tissue amount. Can be used for NPC as well as PC.
	!! ARGS[1] = npc_nbsize - the natural bust size of the NPC/PC.
	!! ARGS[2] = npc_lactatemm - he lactatemm of the NPC/PC.
	!! RESULT = Fat amount in ccm * 10.
	!! function for cup size volume in ccm y = 0,0002023*x^3 + 0,029199*x^2 + 4,3791*x + 70
	!! x = ((ARGS[1]/5) + 1)*10
	!! this function is based on the x figures for pcs_bust size (moving in steps of 5) and the actual cup sizes from a wikipedia table, which can be found here: https://en.wikipedia.org/wiki/Bra_size
	!! The function was estimated with excel using a trend line estimation for polynoms of third grade and a y = 0 at 70ccm
	!! https://www.ncbi.nlm.nih.gov/pubmed/11936199
	!! The percentage of fat volume in the total breast volume varied from 7 to 56% and the percentage of fat weight in the total breast weight varied from 3.6 to 37.6%. This great variability in the respective proportions of fat and glands in the evaluated specimens was not significantly correlated to age and body mass index.
	if ARGS[1] > 0:
		temp_var = ((ARGS[1]/5) + 1)*10
		temp_var2 = (((2023*temp_var*temp_var*temp_var)/10000000)+((29199*temp_var*temp_var)/1000000)+((43791*temp_var)/10000)+70)*10
		if temp_var2 > ARGS[2]:
			RESULT = temp_var2 - (ARGS[2] + ARGS[2]/50)
		elseif temp_var2 = ARGS[2]:
			RESULT = 0
		else
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$get_bfat_tissue</i>!</font> - Node ARGS[1] - more mammary gland tissue available then total breast tissue.</b>'
		end		
	else
		if ARGS[2] > 700:
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$get_bfat_tissue</i>!</font> - Node ARGS[2] - more mammary gland tissue available then total breast tissue.</b>'
		else
			RESULT = 700
		end
	end
end

if $ARGS[0] = '$calc_npc_lactatemm_0':
	!! func('lact_lib', 'calc_npc_lactatemm_0', npc_glandamount, npc_prodstate, npc_breastage, npc_breastcount)
	!! New calc lactatemm function usuable for NPCs. Test function number one.
	!! ARGS[1] = npc_glandamount - The glandamount of the npc per breast. Glandamount here is actually the alveoli amount per breast. The value is 4500 to 150000 per breast depending on the genetics or if the npc went through pregnancy already.
	!! ARGS[2] = npc_prodstate - The breast production state of the npc. State can be "none", "induced" or "natural".
	!! ARGS[3] = npc_breastage - State can be "virgin" or "mature". Virgin in this case means that the breasts did not go through pregnancy changes yet, while mature is a fully developed breast that had all the changes during pregnancy.
	!! To determine the breastage, just check if the NPC has gone through pregnancy or not.
	!! ARGS[4] = npc_breastcount - The breast count of the NPC. If 0 the result will always be 0. Could be used for amputation events or multiple breasts events.
	!! The function will return something even if there is no lactation currently happening. this could be used for special events where sudden lactation is induced with the help of drugs. For example a lactation pill that will cause the NPC to lactate immediately without classical induction or natural growth during pregnancy.
	!! RESULT = lactatemm in ml*10

	if ARGS[2] = 'none':
		if ARGS[3] = 'virgin':
			temp_var = 2
		elseif ARGS[3] = 'mature':
			temp_var = 2
		else
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_npc_lactatemm_0</i>!</font> - Node ARGS[2] "none".</b>'
		end
	elseif ARGS[2] = 'induced':
		if ARGS[3] = 'virgin':
			temp_var = 20
		elseif ARGS[3] = 'mature':
			temp_var = 80
		else
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_npc_lactatemm_0</i>!</font> - Node ARGS[2] "induced".</b>'
		end
	elseif ARGS[2] = 'natural':
		if ARGS[3] = 'virgin':
			temp_var = 20
		elseif ARGS[3] = 'mature':
			temp_var = 80
		else
			cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_npc_lactatemm_0</i>!</font> - Node ARGS[2] "natural".</b>'
		end
	else
		cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_npc_lactatemm_0</i>!</font> - Root Node ARGS[2].</b>'
	end
	
	if ARGS[1] <= 0:
		RESULT = 0
	else
		RESULT = (ARGS[1]*temp_var*ARGS[4])/1000
	end
end

if $ARGS[0] = '$calc_lactatemm':

	!! func('lact_lib', 'calc_lactatemm')
	!! No arguments at the moment. Information is taken from the global variables 'nbsize', 'lactate','lactateinduced','kid'.
	!! lactatemm should be calculated every day, so if the breasts size is changed naturally the lactatemm will get higher. No change when silicone tits happen. Only natural breast tissue should make milk.
	!! Usage: lactatemm = func('lact_lib','$calc_lactatemm')
	!! RESULT = lactatemm in ml*10

	if lactate = 0:
		RESULT = 0
	elseif lactate >0:
		temp_breastsize = 0
		temp_breastsize += nbsize
		temp_var = 0
		if lactateinduced > 0 and kid <= 0:
			temp_var = ((8*temp_breastsize*temp_breastsize)+(37*temp_breastsize))/4
			RESULT = temp_var
		else
			RESULT = ((8*temp_breastsize*temp_breastsize)+(37*temp_breastsize))
		end
	else
		cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$calc_lactatemm</i>!</font></b>'
	end
end

if $ARGS[0] = '$get_breastmilk':

	!!	func('lact_lib','$get_breastmilk', sucktion_type, sucktion_time)
	!!	ARGS[1] = sucktion_type: the type of sucktion. adult_mouth [0], child_mouth [1], baby_mouth [2], manual_breastpump [3] , electric_breastpump [4], hand_expressing [5], cow milker [6]
	!!	ARGS[2] = sucktion_time: how many minutes the sucking/pumping takes place
	!!	Usage: breastmilkvolume = func('lact_lib','$get_breastmilk', 4, 20)
	!! 	RESULT = Milk in ml*10
	!! what type of sucktion is happening? different sucktion can cause a different demand of breastmilk. Base rate of sucktion is 10ml/minute.

	soreness_mod = 10
	breastpumped = 1
	!! 'suck_flow_rate initialized'
	if ARGS[1] = 0:
		!! 'adult sucking'
		suck_flow_rate = 12 + rand(0,4)
		temp_var = pcs_mood +(ARGS[2]/8)
		if temp_var > 100:
			pcs_mood = 100
		else
			pcs_mood += ARGS[2]/8
		end
	elseif ARGS[1] = 1:
		!! 'child sucking'
		suck_flow_rate = 8 + rand(0,2)
		temp_var = pcs_mood + (ARGS[2]/2)
		if temp_var > 100:
			pcs_mood = 100
		else
			pcs_mood += ARGS[2]/2
		end
	elseif ARGS[1] = 2:
		!!	'baby sucking'
		suck_flow_rate = 6 + (rand(0,2))
		temp_var = pcs_mood + ARGS[2]
		if temp_var > 100:
			pcs_mood = 100
		else
			pcs_mood += ARGS[2]
		end
	elseif ARGS[1] = 3:
		!!	'manual_breastpump sucking'
		suck_flow_rate = 9
	elseif ARGS[1] = 4:
		!!	'electric_breastpump sucking'
		suck_flow_rate = 10
	elseif ARGS[1] = 5:
		!! 'hand expression'
		suck_flow_rate = 3 + rand(1,2)
	elseif ARGS[1] = 6:
		!! 'cow milker sucking'
		suck_flow_rate = 100
	else
		!! 'suck flow else branch'
		suck_flow_rate = 10
	end
	!!	If you pump and work your breast more, soreness will decrease after pumping. This can also decline if your breasts arent worked for a longer time.
	if breastcounter > 0:
		temp_var = breastcounter/10
		soreness_mod += temp_var
		if soreness_mod > 20: soreness_mod = 20
		if nipple_cream = 1:
			soreness_mod += 20
			nipple_cream = 0
		end
	end
	!! No lactation, no milk, but stimulus is applied, so some things are going to happen here.
	if lactate = 0:
		if milkoverdemand <= 0: milkoverdemand = 0
		pump_stop_brake = 0
		!!	This is how much milk demand is applied to the breasts. In this function it is needed to calculate the nipple pain and breast pain.
		max_sucktion_demand = 10*suck_flow_rate*ARGS[2]
		if pain['nipples'] <= 60:
			suck_until_pain = ((60 - pain['nipples'])*10*(soreness_mod/10))/suck_flow_rate
		end
		temp_var = pain['nipples'] + (max_sucktion_demand/100)/(soreness_mod/10)
		if temp_var > 60:
			pain['nipples'] = 65
			pump_stop_brake = 1
			pumptime = suck_until_pain
			max_sucktion_demand = 10*suck_flow_rate*pumptime
		else
			pain['nipples'] += (max_sucktion_demand/100)/(soreness_mod/10)
		end

		temp_var = pain['breasts'] + max_sucktion_demand/1000
		if temp_var > 20:
			pain['breasts'] = 25
		else
			pain['breasts'] += max_sucktion_demand/1000
		end
		!! Pumping breasts is exhausting even if no milk comes. so this is handled here.

		temp_var = pcs_energy - max_sucktion_demand/1500
		if temp_var < 0:
			pcs_energy = 0
			!! energy usage flag on.
			energytomilkpump = 1
		else
			pcs_energy -= max_sucktion_demand/1500
			!! energy usage flag on.
			energytomilkpump = 1
		end

		if pumptime < 10:
			breastcounter += 1
		else
			breastcounter += pumptime/10
		end

		milkoverdemand += max_sucktion_demand
		RESULT = 0
	!! If there is lactation, do the magic
	elseif lactate >0:
		!!	How much milk can go through the nipple. Base rate is 10ml/minute when sucktion is applied to the nipple. If the demand is higher than the nipple can push through, nipple soreness will happen more quickly.
		if pcs_nips > 0:
			max_nip_flow_rate = 6
		elseif pcs_nips > 20:
			max_nip_flow_rate = 8
		elseif pcs_nips > 40:
			max_nip_flow_rate = 10
		elseif pcs_nips > 60:
			max_nip_flow_rate = 12
		elseif pcs_nips > 80:
			max_nip_flow_rate = 14
		elseif pcs_nips > 100:
			max_nip_flow_rate = 16
		else
			max_nip_flow_rate = 10
		end

		!!	If you pump and work your breast more, soreness will decrease after pumping. This can also decline if your breasts arent worked for a longer time.
		if breastcounter > 0:
			temp_var = breastcounter/10
			soreness_mod += temp_var
			if soreness_mod > 20: soreness_mod = 20
			if nipple_cream = 1:
				soreness_mod += 10
				nipple_cream = 0
			end
		end

		!!	If you pump more, more milk will come, disregarding nipplesize. Things will get used to milking and be more loose.
		nip_flow_mod = 1
		temp_var = breastcounter/10
		nip_flow_mod += temp_var
		if nip_flow > 30: nip_flow_mod = 30
		max_nip_flow_rate += nip_flow_mod

		!!	How much milk demand is applied to the breasts. We want to know if we can just suck out what is already stored or if additional milk production is needed to go through the whole pumping/sucking.
		!!	If we only need 20ml from a 100ml storage, we would only substract 20ml, leaving 80ml inside the breasts.
		
		max_sucktion_demand = 10*suck_flow_rate*ARGS[2]
		!!	Is enough milk already in the breasts?
		if lactatemv > max_sucktion_demand:
			!! can the nipples handle the flow?
			if max_nip_flow_rate >= suck_flow_rate:
				milkedvolume = max_sucktion_demand
				lactatemv -= max_sucktion_demand
			elseif max_nip_flow_rate < suck_flow_rate:
				milkedvolume = max_nip_flow_rate*10*ARGS[2]
				lactatemv -= milkedvolume
				!!	time for sore nipples. We apply more sucking than the nipples can handle. So it hurts more. if nipple pain over 60, then it goes to 65. else it just adds soreness.
				max_sucktion_demand -= milkedvolume
				temp_var = pain['nipples'] + (max_sucktion_demand/100)/(soreness_mod/10)
				if temp_var > 60:
					pain['nipples'] = 65
				else
					pain['nipples'] += (max_sucktion_demand/100)/(soreness_mod/10)
				end
			else
				cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$get_breastmilk</i>!</font></b><b>Error in Lactatemv bigger than max_sucktion_demand fork.</b>'
			end
		elseif lactatemv < max_sucktion_demand:
			!!	Magic!
			temp_var = (lactatemv/(max_nip_flow_rate*10))
			if temp_var <= 0 and lactatemv > 0: temp_var = 1
			pumptime_left = ARGS[2] - temp_var
			if pumptime_left <= 0 and lactatemv > 0: pumptime_left = 1
			temp_var = lactaterate/60
			if temp_var <= 0 and lactaterate > 0: temp_var = 1
			if temp_var >= max_nip_flow_rate:
				if ARGS[1] = 2: breastcounter += 50
				milkedvolume = (max_nip_flow_rate * 10 * pumptime_left) + (max_nip_flow_rate * 10 * (ARGS[2] - pumptime_left))
				lactatemv -= (max_nip_flow_rate * 10 * (ARGS[2] - pumptime_left))
			elseif temp_var < max_nip_flow_rate:
				!!with a baby sucking, more milk should be made due to nature ...
				if ARGS[1] = 2: milkoverdemand += 100000
				milkedvolume = (temp_var * pumptime_left) + (max_nip_flow_rate * 10 * (ARGS[2] - pumptime_left))
				lactatemv -= (max_nip_flow_rate * 10 * (ARGS[2] - pumptime_left))
			else
				cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$get_breastmilk</i>!</font></b><b>Error in Lactatemv smaller than max_sucktion_demand fork.</b>'
			end
			if lactatemv <= 0: lactatemv = 0
			!!	the breasts had to produce milk, so energy is used.
			temp_var = pcs_energy - milkedvolume/1000
			if temp_var < 0:
				pcs_energy = 0
				if rand(0,100) > 90: fat -= 1
				!!	this is checking if pcs_energy was impacted during milking.
				energytomilkpump = 1
			else
				pcs_energy -= milkedvolume/1000
				!!	this is checking if pcs_energy was impacted during milking.
				energytomilkpump = 1
			end
			!! the breasts had to produce milk, so hydration is used.
			temp_var = pcs_hydra - milkedvolume/500
			if temp_var < 0:
				pcs_hydra = 0
				energytomilkpump = 1
			else
				pcs_hydra -= milkedvolume/500
				energytomilkpump = 1
			end
			!!	if more is pumped than produced the breasts will hurt too.
			if milkedvolume < max_sucktion_demand:
				!!	milkoverdemand: This is used for the daily milk growth. If there is overdemand, the lactaterate will change the next day. Will be set to 0 every day.
				milkoverdemand += max_sucktion_demand - milkedvolume
				temp_var = pain['breasts'] + (max_sucktion_demand - milkedvolume)/1000
				if temp_var > 20:
					pain['breasts'] = 20
				else
					pain['breasts'] += (max_sucktion_demand - milkedvolume)/1000
				end
			end
			if max_nip_flow_rate < suck_flow_rate:
				!!	sore nipples again. "used to breastpumping" variable needs to come in here too!
				temp_var = pain['nipples'] + ((((max_nip_flow_rate*100)/60) * pumptime_left)/100) + (max_sucktion_demand/100)/(soreness_mod/10)
				if temp_var > 60:
					pain['nipples'] = 65
				else
					pain['nipples'] += ((((max_nip_flow_rate*100)/60) * pumptime_left)/100) + (max_sucktion_demand/100)/(soreness_mod/10)
				end
			end
		end
		!! The standard nipple pain applied due to pumping. Adding to the pain that is calculated above
		temp_var = pain['nipples'] + (max_sucktion_demand/100)/(soreness_mod/10)
		if temp_var > 60:
			pain['nipples'] = 65
		else
			pain['nipples'] += (max_sucktion_demand/100)/(soreness_mod/10)
		end

		if pumptime < 10:
			breastcounter += 1
		else
			breastcounter += pumptime/10
		end

		RESULT = milkedvolume
	else
		cls & '<b><font color="red">BAD ARGUMENT CHECK IN <i>$get_breastmilk</i>!</font></b>'
	end
end

!! lact_lib

!!	bp_milking - breast pump milking
!!	use href="exec:gt ''lact_lib'',''bp_milking''"

if $ARGS[0] = 'bp_milking':
	pumptime = 0
	pumptype = 0
	if $location_type ! 'bathroom' and pcs_exhibition < 60:
		'You can''t use it here.'
	else
		*clr
		cla
		pumptime = input ("How long do you plan to pump your breasts? (Not more than 60 minutes)")
		if pumptime <= 0 or pumptime > 60:
			minut += 2
			act 'Don''t pump':gt $loc, $metka
		elseif pumptime > 0 and pumptime <= 60:
			gt 'lact_lib', 'milking'
		end
	end
end

!!	man_milking - manual (with hands) milking
!!	use href="exec:gt ''lact_lib'',''man_milking''"

if $ARGS[0] = 'man_milking':
	pumptime = 0
	pumptype = 1
	if $location_type ! 'bathroom' and pcs_exhibition < 60:
		'You can''t do this here.'
	else
		*clr
		cla
		pumptime = input ("How long would you like to milk your breasts? (Not more than 60 minutes)")
		if pumptime <= 0 or pumptime > 60:
			minut += 2
			act 'Don''t milk':gt $loc, $metka
		elseif pumptime > 0 and pumptime <= 60:
			gt 'lact_lib', 'milking'
		end
	end
end

!!	milking
!!	never use directly. Always use bp_milking, man_milking or sex_milking

if $ARGS[0] = 'milking':
	if pumptime <= 0 or pumptime > 60:
		act 'Finish':gt $loc, $metka
	end
	if pumptype = 1:
		pumptime = (pumptime*6)/10
	end
	if lactate > 0 and pain['nipples'] < 60:
		milkedvolume = func('lact_lib','$get_breastmilk', 3, pumptime)
		'<center><img <<$set_imgh>> src="images/pc/body/tits/pump_lactating.jpg"></center>'
		'You attach the pump to your breast and start rythmically squeezing the bulb until your breasts feel empty.<br>You give it a few more pumps and detach the pump.<br>You filled the bottle with <<milkedvolume/10>>ml of your milk.'
		breastcounter += 1
		if energytomilkpump > 0 and pcs_energy = 0:
			'<br>During pumping you feel really hungry, producing breast milk seems to be more exhausing then thought.'
			energytomilkpump = 0
		elseif energytomilkpump > 0:
			'<br>You feel a bit thirsty after pumping.'
			energytomilkpump = 0
		end
		if bcream_used = 1:
			pcs_nips += rand(0,2)
			bcream_used = 0
		end
		minut += pumptime
	elseif lactate = 0 and pain['nipples'] < 60:
		if rand(1,50) + prolactinlvl >= rand(200,250):
			'<center><img <<$set_imgh>> src="images/pc/body/tits/lactate_start.jpg"></center>'
			'As usual, you attach the pump but after a few pumps white liquid suddenly starts flowing from your nipples.<br>You started lactating!'
			lactateinduced = 1
			lactate = 1
			if func('lact_lib','$calc_lactatemm') > 0: lactatemm = func('lact_lib','$calc_lactatemm')
			if prolactinlvl < 200: prolactinlvl = 200
			lactaterate = 10*(prolactinlvl/200)
			pcs_nips += 2
			pumpinggrowth = 0
		else
			milkedvolume = func('lact_lib','$get_breastmilk', 3, pumptime)
			'<center><img <<$set_imgh>> src="images/pc/body/tits/t<<tits>>.jpg"></center>'
			'You attach the pump to your nipples and start squeezing the bulb. The vacuum feels good on your nipples.'
			if prolactinlvl > 70: 'A few droplets of liquid come out of your nipples but it is not milk.'
			breastcounter += 1
			if pump_stop_brake = 1:
				'During pumping your nipples start to hurt extremely. You have to stop after <<pumptime>> minutes, because you couldn''t go on.'
			end
			if prolactinlvl > 75:
				if rand(0,10) > 9:
					pumpinggrowth += 1
				end
				'After finishing, your breasts feel weirdly engorged.'
			end
			if bcream_used = 1:
				pcs_nips += rand(0,2)
				bcream_used = 0
			end
		end
		minut += pumptime
	else
		'Your nipples feel too sore to use the pump right now.'
	end
	if milkedvolume > 0:
		lact_engorgement = 0
		lactatemess = 0
		act 'Pour it into the sink':
			*clr
			cla
			'<center><img <<$set_imgh>> src="images/pc/body/tits/milk_sink.jpg"></center>'
			'<center>You pour <<milkedvolume/10>>ml of your breast milk into the sink and clean up your breastpump.</center>'
			minute += 5
			act 'Finish':
				milkedvolume = 0
				gt $loc, $metka
			end
		end
		if pcs_hydra < 100:
			act 'Drink it':
				*clr
				cla
				'<center><img <<$set_imgh>> src="images/pc/body/tits/milk_drink.jpg"></center>'
				'<center>You drink your own breast milk and clean up your breastpump.</center>'
				'<center>The milk is still warm from your breasts.</center>'
				if pcs_hydra < 90:
					pcs_hydra += 10
				else
					pcs_hydra = 100
				end
				minute += 7
				act 'Finish':
					milkedvolume = 0
					gt $loc, $metka
				end
			end
		end
	else
		act 'Finish':gt $loc, $metka
	end
end

!!	engorged_morning
!!	use href="exec:gt ''lact_lib'',''engorged_morning''"

if $ARGS[0] = 'engorged_morning':
	minut += 5
	'<center><img <<$set_imgh>> src="images/pc/body/tits/lactate_start.jpg"></center>'
	'You wake up and your breasts hurt. As you look down, you can see that you have a heavy letdown. You should pump your breasts as soon as possible.'
	act 'Finish':gt $loc, $metka
end

--- lac_lib ---------------------------------